Articles

1721-1740 of 2042 < first | | | last >
  • Who Will Manage Your Industrial Energy Costs?

    Energy cost control is not a one-time event, and it takes more than one tool to make progress. A number of people, both internal and external to an industrial facility, can contribute to effective energy management.

    Christopher Russell
    02/03/2006
  • Motives and rewards for managing plant-wide energy consumption

    What are the motives for managing energy in today’s lean competitive environment? Industry’s motives and rewards for managing their energy include plant reliability, speed, flexibility, product quality, and greater capacity to generate revenue.

    Christopher Russell
    02/03/2006
  • Feedstock change is hot and poppin’

    Corn, other renewable resources garner increasing interest and investment. Read here about the progress that is being made in discovering a new generation of feedstock.

    Bill Gerards, contributing editor
    01/24/2006
  • Don'’t let a start-up finish you off

    Dirk Willard spent years as a "start-up" engineer. He advises that proper planning is crucial for achieving a happy ending.

    Dirk Willard, senior editor
    01/24/2006
  • Hard lessons worth sharing

    Editor-in-Chief Mark Rosenzweig writes that the causes of two incidents should get attention from other processors.

    Mark Rosenzweig
    01/24/2006
  • Process Hazard Analysis: Collar hazards with a Bow-Tie

    A flexible, graphical method offers many advantages for initial process hazard analyses. Read here for a detailed explanation of the Bow-Tie method.

    Jack Philley, Baker Engineering and Risk Consultants, Inc.
    01/23/2006
  • Flow metering gets more fluid

    There are more and more funcationalities being added to your most trusted instrumentation. These established technologies have expand their reach and performance.

    Mike Spear, editor at large
    01/09/2006
  • Pump Start-Ups

    There are only three things we need to do to start a pump.

    Ross Mackay
    01/09/2006
  • Track that spill

    Chemical Processing's readers offer tips about how to locate and identify a chemical spill.

    01/02/2006
  • Don’t waste your boilers

    Chemical Processing's readers offer tips about how to properly isolate a waste heat boiler.

    01/02/2006
  • Design Methods for Reflux Condensers

    Reflux condensers have become increasingly important to eliminate condensable organic components from plant off-gas streams and meet environmental requirements. Recognizing this need, HTRI conducted an experimental and analytical study in the late 90s to predict flooding, as well as heat transfer and pressure drop in vertical intube reflux condensers.

    Zhi Hua (Frank) Yang
    12/01/2005
1721-1740 of 2042 < first | | | last >