1601-1620 of 1907 < first | | | last >
  • Don'’t let a start-up finish you off

    Dirk Willard spent years as a "start-up" engineer. He advises that proper planning is crucial for achieving a happy ending.

    Dirk Willard, senior editor
  • Hard lessons worth sharing

    Editor-in-Chief Mark Rosenzweig writes that the causes of two incidents should get attention from other processors.

    Mark Rosenzweig
  • Process Hazard Analysis: Collar hazards with a Bow-Tie

    A flexible, graphical method offers many advantages for initial process hazard analyses. Read here for a detailed explanation of the Bow-Tie method.

    Jack Philley, Baker Engineering and Risk Consultants, Inc.
  • Flow metering gets more fluid

    There are more and more funcationalities being added to your most trusted instrumentation. These established technologies have expand their reach and performance.

    Mike Spear, editor at large
  • Pump Start-Ups

    There are only three things we need to do to start a pump.

    Ross Mackay
  • Design Methods for Reflux Condensers

    Reflux condensers have become increasingly important to eliminate condensable organic components from plant off-gas streams and meet environmental requirements. Recognizing this need, HTRI conducted an experimental and analytical study in the late 90s to predict flooding, as well as heat transfer and pressure drop in vertical intube reflux condensers.

    Zhi Hua (Frank) Yang
  • Evaluate reactivity with limited resources

    The initial critical steps of reactivity risk reduction need not be expensive, time consuming and require extensive expertise.

    W. J. Rogers, C. Wei and M. S. Mannan, Mary Kay O’Connor Process Safety Center
  • EPA seeks to reduce TRI reporting burden

    The EPA has proposed a new act in regards to reducing Toxics Release Inventory (TRI). Read here to get the details on how it might affect your plant.

    Lynn Bergeson, regulatory editor
  • Dig Deeper to Find More Capacity

    Pipeline simulation software can uncover hidden causes of capacity bottlenecks.

    Todd J. Willman, EPCON International, Reuben Gates, Shell Chemical LP, and Mark Haboian, Eastman Kodak Co.
  • The Synergy of Simulation, Experimentation and Technical Support Activities in a Research Consortium

    For the business of designing process heat exchangers, computational fluid dynamics (CFD) tools are still not practical for everyday use. However, in a research consortium such as HTRI, integrating advanced analysis tools like CFD with industrial-sized experimentation and then applying them to real-world technical problems provides a significant synergistic benefit to the consortium members.

    Kevin J. Farrell
  • Boost maintenance staff efficiency

    Many plants strive to increase the efficiency of maintenance craftspeople, but find it hard to identify where to focus efforts and how to track progress.

    Timothy J. Finigan, Fluor
1601-1620 of 1907 < first | | | last >