Articles

1541-1560 of 1935 < first | | | last >
  • What you need to know about nanotechnology

    For the first time at the Chem Show, a two-day workshop and symposium titled “Nano 101 — Nanomaterials Processing” will provide an overview of the nanomaterials industry and market, synthesis and processing issues, safe handling and use of nanostructured materials and case studies on engineered nanoparticulate material systems.

    Ken Schnepf, managing editor
    08/13/2007
  • 10 Tips for Success

    Paying attention to the following points can ease implementing and improving critical plant procedures:

    Patrick Kelly, Honeywell Process Solutions
    08/01/2007
  • Help Your Operators

    Automating procedures within control systems can serve to make your operators more effective and more consistent. With studies showing more than 40% of all plant incidents stemming from some form of human error, it makes sense to give automation a larger role in day-to-day operations.

    Patrick Kelly, Honeywell Process Solutions
    08/01/2007
  • Politics, Appearances and Thinking Green

    The push to “green” energy is good for automation vendors everywhere, but U.S. government rhetoric may put companies on this side of the Atlantic at a competitive disadvantage.

    08/01/2007
  • Better water technology is on tap

    The drought in many parts of the U.S. so far this summer points out the preciousness of water supplies. There’s greater demand for waste-minimization and recycle-and-reuse technologies as well as more awareness of utility usage and the impact of life-cycle costs on water-treatment operations. Here’s a look at new technologies that will help.

    C. Kenna Amos, contributing editor
    07/24/2007
  • Face energy challenges like a frontiersman

    Be both a hunter and a farmer of energy management, advises Contributing Editor Christopher Russell, in this month's Energy Saver column.

    Christopher Russell, contributing editor
    07/24/2007
  • Get safety under control

    Check out a different approach to safety analysis and a valuable new reference in this month's column from Editor Mark Rosenzweig.

    Mark Rosenzweig, Editor in Chief
    07/06/2007
  • Squeeze More from Your Motors

    By integrating smart motor control centers that will monitor energy consumption a plant can remove wasteful energy expenditure, prevent unplanned downtime, and improve overall operational efficiency. Recent tax code amendments make these improvements inviting.

    Moin Shaikh, Siemens
    06/07/2007
  • Protect your electronics

    Ignoring exposed electrical boxes can cost you a bundle, says Contributer Dirk Willard, in this month's Field Notes column.

    Dirk Willard, contributer
    06/06/2007
  • Process safety is a good way to avoid bad consequences

    Process safety is an essential component of risk avoidance. The Occupational Safety and Health Administration (OSHA) has long recognized the critically important role for process safety awareness.

    Lynn Bergeson, regulatory editor
    06/06/2007
  • Uncertain safety

    Users seeking appropriate process safety systems aren’t getting enough help from unspecific standards and ideal-world certifications. Here’s how to gain useful safety capabilities in a buyer-beware world.

    06/01/2007
  • Get ready to comply with new security mandates

    New anti-terrorism standards require the Department of Homeland Security to identify and regulate "high-risk chemical facilities." These facilities will be subject to a security vulnerability assessment. Where does your plant fit in with these new standards?

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    05/29/2007
  • Build your portfolio

    Is energy efficiency an engineering project or a management process? Contributing Editor Christopher Russell answers that question in this month's Energy Saver column.

    Christopher Russell, contributing editor
    05/16/2007
  • Cut column energy consumption

    With increasing energy prices and public sensitivity to energy consumption, many plants are paying more attention to optimizing distillation. Simple and low-risk operational changes often can provide substantial savings.

    Andrew Sloley, VECO U.S.A.
    05/08/2007
  • Equipment & Services: May

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    05/08/2007
  • Strike the Right Balance

    Make the walk-through your first line of defense, advises Dirk Willard in this month's Field Notes column.

    Dirk Willard, senior editor
    04/30/2007
  • Dow engineer wins the 3rd annual Plant Innovation Award

    This year’s award goes to Bridget Schoonover, senior improvement specialist for Dow in Freeport, Texas, who led a team that validated and implemented a solution to a source of lost revenue at the plant: a waste stream.

    Dirk Willard, senior editor
    04/25/2007
1541-1560 of 1935 < first | | | last >