141-160 of 206 < first | | | last >
  • Act Before There’s Not a Drop to Drink

    Ground water protection is the responsibility of everyone including the chemical industry. An energetic group of state and federal ground water agencies, industry, environmentalists and other stakeholders, however, has made it a key area of their focus. The Ground Water Protection Council (GWPC) is a nonprofit Section 501(c)(6) organization dedicated to promoting and ensuring the use of best management practices and “fair but effective” laws regarding comprehensive groundwater protection.

    Lynn Bergeson
  • Eliminate exchanger tubing troubles

    Today, many companies consider coating the inside of carbon steel tubes a best practice for extending the performance and lifecycle of a heat transfer system.

    Edward Curran, Curran International
  • Do some heavy thinking about light loads

    Cutting steam demand can get you into hot water, advises Contributing Editor Andrew W. Sloley, contributing editor, in this month's Plant InSites column.

    Andrew W. Sloley, contributing editor
  • Don’t look at precondensers in a vacuum

    Consider the impact of the downstream vacuum ejector on precondenser performance, advises Andrew Sloley, in this month's Plant InSites column.

    Andrew W. Sloley, contributing editor
  • Better water technology is on tap

    The drought in many parts of the U.S. so far this summer points out the preciousness of water supplies. There’s greater demand for waste-minimization and recycle-and-reuse technologies as well as more awareness of utility usage and the impact of life-cycle costs on water-treatment operations. Here’s a look at new technologies that will help.

    C. Kenna Amos, contributing editor
  • Cut column energy consumption

    With increasing energy prices and public sensitivity to energy consumption, many plants are paying more attention to optimizing distillation. Simple and low-risk operational changes often can provide substantial savings.

    Andrew Sloley, VECO U.S.A.
  • Equipment & Services: May

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

  • Sample pump eliminates emissions

    A compact system significantly improves analyzer accuracy. This innovative turnkey solution for analyzer emissions is a solid-state pump with an ultra-sensitive pressure regulator that mixes a compatible gas with the analyzer samples to achieve a constant vent header pressure — even during times of plant upset.

    Kazi Hassa, Parker Hannifin
  • Get answers to your biomonitoring questions

    Guidance for chemical manufacturers, processors, and distributors about Section 8(e) of the Toxic Substances control act was issued on September 14, by the U.S. Environmental Protection Agency (EPA). Chemical Processing's Regulatory Editor Lynn Bergeson discusses the new regulation.

    Lynn Bergeson, regulatory editor
  • Washington targets plant security

    Federal actions undoubtedly will markedly impact the chemical industry. Nevertheless, we don’t know at this point whether federal chemical security legislation will happen in 2006.

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
  • Succeed at bioprocess scale-up

    While fermentation-based syntheses were once reserved for producing high-value specialty chemicals and biopharmaceuticals, bioprocess routes now are gaining increasing attention for commodity products.

    John L. Shaw, P.E., and Scott A. Rogers, P.E., CH2MHill Lockwood Greene
141-160 of 206 < first | | | last >