Articles

141-160 of 194 < first | | | last >
  • Keep measurements on the level

    This article looks at six technologies — mechanical floats and displacers, differential pressure, capacitance, ultrasonic, radar, and guided wave radar — that are used most often for automated control, and provides practical guidance for choosing among them.

    Jerry Boisvert, Siemens Energy & Automation
    11/01/2006
  • Get a handle on solids’ flow

    Properly accounting for how bulk solids actually will flow in a vessel or overall process can be crucial for successful operations. Learning some simple parameters can often provide a good sense of flowability.

    Don McGlinchey, Glasgow Caledonian University
    05/22/2006
  • Flow metering gets more fluid

    There are more and more funcationalities being added to your most trusted instrumentation. These established technologies have expand their reach and performance.

    Mike Spear, editor at large
    01/09/2006
  • Flow Meter Focus

    ChemicalProcessing.com introduces Flow meter focus, a compilation of useful articles, news, white papers and product information related to flow meters.

    09/28/2005
  • Today’s China Syndrome

    The country boasts not just booming exports but a strong desire for the best technology.

    Mike Spear, editor at large
    09/27/2005
  • Make the most of HART-enabled field devices

    HART-enabled field devices offer many benefits and not just for process control. They can lead to productivity gains, maintenance savings and more efficient and accurate recordkeeping.

    Dan Prugar, Meriam Process Technologies
    08/11/2005
  • Software Drives OEM Toward Efficiency and Energy Savings

    ABB designed software for its ACS800 drive so Curtis-Toledo could improve the operation of its rotary-screw compressors. The customized software can control the system pressure, air delivery, oil temperature and duty cycle directly from the drive.

    John Wilmes, ABB Inc.
    06/23/2005
  • Process engineering: Dryer provides a concrete lesson in control

    Removing water or moisture from a liquid stream is a critical operation in many processes. Liquid stream dryers commonly contain either molecular sieves or adsorbents; during the last 20 years, the use of molecular sieves has become much more common.

    Andrew Sloley, contributing editor, and Richard Readshaw, senior staff process engineer for VECO USA Inc.
    05/03/2005
  • Process engineering: Doing your level best

    Plant engineers who find it is difficult to get good level measurements have plenty of company. A recent poll shows that it is considered to be one of the two most vexing problems by process automation professionals.

    04/08/2005
  • Chemical research gets a new look

    Editor at large Nick Basta looks at what the chemical industry can do to re-invigorate its technological research. He says technology pioneered in the pharmaceutical industry promises broad benefits.

    03/11/2005
  • Process engineering: In the trenches of Fieldbus War II

    Like the 20th Century’s Great Conflict, the first Fieldbus War never really ended. But what will the outcome be this time? This article from CONTROL makes an educated prediction on how the battle may turn out.

    03/10/2005
  • Process Engineering: Measure problems on a higher level

    A reader has a level measurement problem with a differential pressure level transmitter. The transmitter does not track the level properly. Check out the question and the in-depth answer in this contribution from ControlGlobal.com.

    03/03/2005
141-160 of 194 < first | | | last >