Articles

101-120 of 128 < first | | | last >
  • Valve innovation helps with nuclear waste

    Valves and actuators designed for handling radioactive waste must meet strict government requirements. This sometimes requires unconventional solutions. Such was the case at the Hanford Waste Treatment Project (WTP), Hanford, Wash.

    Roy Johnson, Flowserve
    12/05/2006
  • How to select control valves, Part 2

    When it comes to selecting and sizing control valves and positioners, this article not only helps you pick the right one for the right job, but also includes a valuable valve selection chart you can download!

    Béla Lipták, PE, CONTROL Columnist
    10/17/2006
  • Heat integration steps can present control problems

    The more energy prices rise, the more heat integration saves. However, heat integration steps can present complex control problems. Slip-ups in putting control systems in place can make operations nearly impossible. That certainly was the case at one unit using heat recovery.

    Andrew Sloley, contributing editor and Carolyn K. Hawley, VECO USA
    09/13/2006
  • Innovations in batching, dosing and weighing

    Challenges brought on by new regulations and technical problems for batching, dosing and weighing have pushed users to find some innovative and surprising solutions beyond our own industry.

    09/05/2006
  • How to select control valves, Part 1

    When it comes to selecting and sizing control valves, the non-commercial chart in this article not only helps you pick the right one for the job, but also serves as a reference tool you can download.

    Béla Lipták, PE, CONTROL Columnist
    08/15/2006
  • EDDL enhancements gain momentum

    Several major vendors have now announced plans to fully support enhancements to the electronic device description language (EDDL) used by HART devices, reports Ed Ladd of the HART Communication Foundation. These enhancements will allow users to interact with their intelligent devices in new ways. They ease configuration, even of complex instruments, and support storage of historical data for troubleshooting and diagnostics.

    Ed Ladd
    08/16/2005
  • Don'’t Get Mixed Up By Scale-Up

    Use this systematic approach to successfully scale-up mixing processes even without geometric similarity.

    David S. Dickey, MixTech, Inc.
    08/04/2005
  • Process manufacturing: No transfer required

    As the pharmaceutical industry has matured, concerns about the safe handling of drug compounds during the manufacturing process have increased. To meet exposure limits and protect batches from any kind of contamination, the industry’s need for improved containment has increased.

    Diane Dierking
    05/04/2005
  • Process Engineering: HART – Dealing with device description

    There is a myth surrounding HART devices that you'll need a device description to communicate with a HART device. Learn why this isn't true and what you do need to know in operating a HART communication device.

    Ed T. Ladd, Jr.
    04/12/2005
  • Process engineering: Pneumatic conveying moves ahead

    Pneumatic conveying has long been a popular choice for moving bulk materials. However, the technology hasn't been standing still, and this can influence the choice between several types of pneumatic systems.

    Nick Basta
    04/04/2005
  • Process engineering: Avoid pitfalls when starting up pumps

    Improper startup can result in excessive temperature and radial loading, both of which can lead to lower pump reliability from problems such as seal and bearing failure. Consultant Ross Mackay describes the three steps that should be followed during pump startup.

    03/14/2005
  • Process engineering: In the trenches of Fieldbus War II

    Like the 20th Century’s Great Conflict, the first Fieldbus War never really ended. But what will the outcome be this time? This article from CONTROL makes an educated prediction on how the battle may turn out.

    03/10/2005
  • Process engineering: Is your pump cavitating?

    That rumbling/rattling noise you hear from your pump is the symptom for any number of potential problems. The first step is identifying the problem. This article will help you determine what exactly is wrong with your pump.

    Ross Mackay
    02/15/2005
  • Get Control of Reactor Temperatures

    A reader has a plug-flow reactor whose temperature is starting to cycle. The company tried to tuning both controllers but saw no improvement. Read about potential solutions to this reader's problem.

    Diane Dierking, Senior Editor
    08/05/2004
101-120 of 128 < first | | | last >