Articles
| Title/Author | Date |
|---|---|
|
Generate Power Using Waste Heat Partnering could benefit process plants looking to recover low-level heat. |
05/14/2013 |
|
Proper design depends upon an understanding of key relationships. |
04/30/2013 |
|
Make the Most of Reciprocating Compressors A number of factors contribute to optimum performance and reliability. |
04/16/2013 |
|
Ionic Solvents Win British Accolade Materials stem from industry/academic research partnership. |
04/15/2013 |
|
Switching to the fuel may make sense even for sites far from pipelines. |
03/27/2013 |
|
Shape Selectivity Spurs Separation New molecule separation technique promises a more-energy-efficient option. |
03/26/2013 |
|
Various factors affect the choice and operation of liquid/vapor separators. |
03/19/2013 |
|
Pumping LPG: Take A Load Off Loading Readers suggest how to avoid problems in pumping liquefied petroleum gas. |
02/28/2013 |
|
Sulfur Spurs Methane Conversion to Ethylene Researchers will be examining different catalysts, different operating conditions and also other soft oxidants. |
02/14/2013 |
|
Consider "Pasteurizing" Your Column A side-draw may cut capital and energy costs for distillation. |
02/12/2013 |
|
Sustainable Water Management: The Tide is Turning Chemical makers increasingly focus on water-related risks and opportunities |
02/04/2013 |
|
Designing Compressed-Air Piping Systems Shouldn't Be An Afterthought Compressed-air piping size impacts control and cost. |
01/31/2013 |
|
Trifluoromethane Byproduct May Go From Bane To Boon Researchers have developed a way to use trifluoromethane to create valuable chemicals. |
01/23/2013 |
|
Chemicals Promise Better Buildings Report highlights potential of energy-efficient building materials. |
01/16/2013 |
|
Get Rid Of Problems Not Just Off-Gas A variety of factors may compromise performance of an oxidizer. |
01/15/2013 |
|
Sieve Layer Enhances Oxide Catalyst The coating acts like a sieve, allowing only the smaller reactants in a mixture to slip through the holes and react. |
01/10/2013 |
|
Milling Breaks Down Barriers for MOFs Solvent-free approach promises low-cost, environmentally friendly large-scale production. |
01/08/2013 |
|
Adsorbent Eases Carbon Capture Releasing gases from highly selective material takes less energy. |
12/04/2012 |
|
Avoid Problems with Random Packing Careful internals' selection is crucial for absorbers and scrubbers. |
11/28/2012 |
|
Process Puzzler: Replace the Tank A fiberglass vessel isn't appropriate for the intended use. |
11/20/2012 |
