2061-2080 of 2518 < first | | | last >
  • The FRETT approach to pump problems

    Some U.S. oil refineries repair their centrifugal pumps every three years while other refineries enjoy an average repair interval of 10 years. Learn about the highest-performing refineries and other petrochemical companies that have significantly reduced pump failures, and how you can obtain the same results.

    Heinz P. Bloch, P.E.
  • Nominations open for 2007 Plant Innovation Award

    Chemical Processing’s Plant Innovation Award is presented annually to recognize innovative solutions to processing problems at chemical plants throughout the world. Nominate a worthy candidate today.

  • Implementing an operations management system

    Things are changing at warp speed. Manufacturing companies are collecting large volumes of data from data systems but improvements are possible only if the data are analyzed and developed into useful business parameters.

    Robert Wojewodka, The Lubrizol Corp.
  • Washington targets plant security

    Federal actions undoubtedly will markedly impact the chemical industry. Nevertheless, we don’t know at this point whether federal chemical security legislation will happen in 2006.

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
  • Material Handling: Ensure Proper Silo Design

    Designing equipment for solids is not an exact science. The flows of gases and liquids are generally better understood than those of solids. Most production problems arise from flaws in the design. This article presents questions you can ask yourself to ensure reliable flow in your silo.

    Joseph Marinelli, Solids Handling Technologies, Inc.
  • Expect tighter particulate matter standards

    Tighter particulate matter standards are in our future, according to Regulatory Editor Lynn Bergeson in this month's Compliance Advisor column on

    Lynn Bergeson, regulatory editor
  • R&D takes the fast track

    High throughput methods are boosting productivity. A survey of member companies by the American Chemical Council (ACC), Arlington, Va., showed that this year the U.S. chemical industry would be spending around 3% more on research and development than it did in 2005.

    Mike Spear, editor at large
  • Intellectual property issues limit university research

    Colleges must slake their thirst for royalties as intellectual property issues limit industry-backed university research, according to Chemical Processing's Editor at Large Mike Spear.

    Mike Spear, editor at large
  • Specifying thermal components systematically

    A common mistake made when specifying a heater or its components is not fully appreciating interactions. Taking a systems approach when specifying thermal components can help.

    Christopher C. Lanham, Watlow
  • Choosing the right contract

    A contract can be a stone in your shoe. Knowing which type of contract to choose can make your job easier. Chemical Processing's Senior Editor Dirk Willard provides tips on various types of contracts.

    Dirk Willard, senior editor
  • Increase pump performance

    In this web exclusive on, pump expert Ross Mackay says a key to a pump's performance is to look at the control system it's running with.

    Ross Mackay
  • Boiling water is easy as one, two, three, four

    There’s more to boiler level control than measuring level and adjusting a feedwater valve. Improved measurements and inverse response are just a few of the influences on operating boilers in a reliable manner.

    David W. Spitzer
  • NeSSI tames the communications monster

    The new sampling/sensor initiative (NeSSI) is moving steadily to fulfill its original promise of increased efficiencies, costs-savings, and micro-analytic capabilities despite recent growing pains related to fieldbus.

    Jim Montague, Executive Editor
  • Sasol plant benefits from reliability improvements

    Sasol Solvents reduced operating costs by more than $2 million dollars at it’s plants in Sasolburg, South Africa. The efforts earned the facility the 2005 HART Plant of the Year Award.

    Dirk Willard, senior editor
  • Can technologists make it to the top?

    Having a background in engineering or science means you are more likely to want an executive with the same, according to Chemical Processing's Mike Spear.

    Mike Spear, editor at large
  • Heat integration steps can present control problems

    The more energy prices rise, the more heat integration saves. However, heat integration steps can present complex control problems. Slip-ups in putting control systems in place can make operations nearly impossible. That certainly was the case at one unit using heat recovery.

    Andrew Sloley, contributing editor and Carolyn K. Hawley, VECO USA
  • Piping for toxic and hazardous gases

    When processes change and plants need to install any of several types of ultra-high-purity process gases, specifying an appropriate piping system is crucial. Learn about a sound system design that maximizes efficiency, purity and safety.

    Jeffrey S. Close
  • CAGI to verify compressor claims

    The compressed air industry is taking a step that will clear the air about the performance of its equipment. For the first time, many compressed air equipment manufacturers will submit their 50 hp to 200 hp lubricated rotary-screw compressors and 200 cfm to 1,000 cfm refrigerated air dryers to an independent laboratory for performance testing.

    Ken Byrd
2061-2080 of 2518 < first | | | last >