Articles

141-160 of 196 < first | | | last >
  • Eliminate exchanger tubing troubles

    Today, many companies consider coating the inside of carbon steel tubes a best practice for extending the performance and lifecycle of a heat transfer system.

    Edward Curran, Curran International
    11/14/2007
  • Control valve diagnostics

    Health monitoring leaves fewer reasons to live with stiction, wrong-sizing and excessive wear.

    Sheila Kennedy
    10/19/2007
  • Monthly Preview: December 2007

    Here's a look at what will soon be featured on ChemicalProcessing.com. Be sure to check back for the latest articles, news and columns before you see it in print.

    10/02/2007
  • Outsourcing to the Rescue?

    Farming out parts of your operation can save time and money and fill necessary skills gaps, but it's not a cure-all.

    08/01/2007
  • Wireless finds its calling

    For maintenance and condition-monitoring, wireless technology offers much more than just reducing or eliminating costs. However, wireless also requires an integrated infrastructure approach rather than independent, proprietary point solutions.

    05/27/2007
  • Combat contamination

    Consider the impact of slope, fittings and valves. Plants can lose sizable amounts of money each year because of contamination caused in process lines. Owners and contractors alike can take steps in the design and construction phase to enhance the drainability and cleanability of a system.

    Michael Bridge, Swagelok Company
    04/04/2007
  • Remember the basics of maintenance

    Despite the “buzz” about asset management systems don’t forget the “oilers”, advises Mike Spear, in this month's End Point column.

    Mike Spear, editor at large
    03/01/2007
  • Plants get help in boosting reliability

    More and more companies are placing greater emphasis on maintenance and seeking help from vendors to boost the effectiveness of their efforts, as some recent major investment decisions demonstrate. Many automation companies now are benefiting by building up asset management services alongside process control capabilities.

    Mike Spear, editor at large
    02/26/2007
  • pH sensor stands up to tough conditions

    Design provides improved reliability in a polymer-precursor batch reactor. Sensors must respond quickly and survive a harsh environment. Poor probe reliability can make the difference between a process that makes money and one that doesn’t.

    Kyle Becker, Polychemie
    01/08/2007
  • Check for human errors

    You may be making an error if you don’t find time to double-check your own and other’s work. Making time to check human work can prevent costly mistakes and save time.

    Trevor A. Kletz, Loughborough University
    10/31/2006
  • Sasol plant benefits from reliability improvements

    Sasol Solvents reduced operating costs by more than $2 million dollars at it’s plants in Sasolburg, South Africa. The efforts earned the facility the 2005 HART Plant of the Year Award.

    Dirk Willard, senior editor
    09/14/2006
  • Try before you buy

    There is another side to toll processing. It involves the companies that arguably have the best possible know-how and hardware — for the simple reason that they are the equipment manufacturers themselves, offering toll processing services that utilize their own products.

    Mike Spear, editor at large
    07/24/2006
  • Control your maintenance

    Automation systems have now reached such a high degree of reliability that many personnel at plants now take them for granted. Learn to use digital communication with your asset management tools to achieve predictive maintenance and substantial savings.

    Ian Verhappen, MTL Instruments Group
    07/12/2006
  • Take a load off maintenance

    Use a powerful, proven technique to identify factors that impede craft efficiency.

    Timothy Finigan, Fluor
    03/22/2006
  • Safeguard plant safety

    The worst thing that can happen at your plant is that an employee suffers a serious injury from a preventable accident. Follow some proven maintenance pointers to keep operations safe.

    Joe Kaulfersch, Pepperl+Fuchs
    01/23/2006
141-160 of 196 < first | | | last >