Articles

1941-1960 of 2384 < first | | | last >
  • Equipment & Services: February

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    02/19/2007
  • Pacify the Fear of a Changing Work Environment

    Understanding how changing a work environment affects people can reduce accidents. Management of Change (MOC) has been one of the hardest of the PSM requirements for industry to master. Making matters worse, it’s rarely applied to people and organization changes. But there are proven approaches.

    Ian Nimmo, User Centered Design Services, LLC
    02/19/2007
  • Rely on an Ombudsman for a Smoother Project

    Working with someone who speaks the operator’s language will avoid problems, according to Dirk Willard, in this month's Field Notes column.

    Dirk Willard, senior editor
    02/12/2007
  • Use a multifaceted approach to manage your energy costs

    One or two tools alone won’t allow you to maximize results, but this list of six common tools will help, according the Christopher Russell in this month's Energy Saver column.

    Christopher Russell, contributing editor
    02/12/2007
  • Chemical security rules edge forward

    Advance rulemaking was recently issued on anti-terrorism standards. Lynn Bergeson provides a summary in monthly Compliance Advisor column.

    Lynn Bergeson, regulatory editor
    02/12/2007
  • The DCS spirit lives on everywhere

    Classic distributed control systems typically remain only in high-availability refining and power applications, but their strategies and capabilities persist in descendants and today’s sophisticated networks.

    Jim Montague, Executive Editor
    02/09/2007
  • Best practices in control system migration

    Migration from your old control system to a new one is as an inevitable as death and taxes. But, the key to minimizing the pain is to abide by the control system migration best practices listed here.

    Dan Hebert, PE, Senior Technical Editor
    02/09/2007
  • Debunk plant myths about diagnostics

    Your current control system can probably do more than you think. Everybody can agree that diagnostics are a good thing — they can identify problems early, and keep the plant running at peak performance. Learn how your existing control systems and analog instruments can deliver diagnostic capabilities, at a fraction of the cost of system or instrument replacements.

    George Buckbee, ExperTune, Inc.
    02/08/2007
  • Making the most of diagnostics

    Make the most of your diagnostics with this helpul summary from George Buckbee of ExperTune, Inc.

    George Buckbee, ExperTune, Inc.
    02/08/2007
  • Energy Savings Pick up Steam

    More attention to steam systems and trap monitoring provides big benefits. At most chemical plants, plant management and operators face increasing pressures to improve the energy efficiency of their processes, so they should see how they can save on steam.

    Mike Spear, editor at large
    01/30/2007
  • 10 tips for diagnosing control valve problems

    To make the most of diagnostic equipment used in chemical processing, technicians must stretch their knowledge of control valves and related diagnostic equipment that keeps tabs on valve health and safety.

    David W. Douglas
    01/22/2007
  • Exporters get reporting relief

    EPA eases annual reporting requirements and thresholds, and exporters are feeling relief, according to Lynn Bergeson in her monthly Compliance Advisor column.

    Lynn Bergeson, regulatory editor
    01/08/2007
  • Understand and Control Hot Vapor Bypass

    Contributing Editor Andrew Sloley says pressure control technique works well if implemented properly, in this month's Plant InSites column.

    Andrew Sloley, contributing editor
    01/08/2007
  • pH sensor stands up to tough conditions

    Design provides improved reliability in a polymer-precursor batch reactor. Sensors must respond quickly and survive a harsh environment. Poor probe reliability can make the difference between a process that makes money and one that doesn’t.

    Kyle Becker, Polychemie
    01/08/2007
  • Distillation control and optimization, Part 3

    Control's Béla Lipták continues his series on control of distillation processes, this time focusing on managing reboiler flow, temperature, feed rate, loading and reflux for economy, stability and safety.

    Béla Lipták, PE, CONTROL Columnist
    01/05/2007
  • Know when to leave a sinking ship

    The unspoken truth about projects is that they all come to an end, according to Dirk Willard in this month's Field Notes column. The key, he says, is knowing when to leave.

    Dirk Willard, senior editor
    01/03/2007
  • How to select control valves, Part 3

    When it comes to selecting and sizing control valves, gain and stability are key characteristics. The non-commercial valve selection chart in this article serves as a reference tool you can download.

    Béla Lipták, Contributing Writer
    12/19/2006
1941-1960 of 2384 < first | | | last >