Articles

241-260 of 307 < first | | | last >
  • Pumping Temperature Considerations

    "Bad actor" pumps are those pumps that have trouble with frequent and repetitive failures. In many cases, the source of the problem is an ANSI pump trying valiantly to handle a liquid well beyond the range of its design rating.of 300 degs. F.

    Ross Mackay
    06/19/2006
  • Mind Mixer Mechanical Design

    While most mixers can provide a long service life — for instance, some are still operating after more than 30 years — mechanical problems can shorten life or even break parts. In this article, learn about all the mechanical problems that may befall your mixing equipment.

    David S. Dickey, MixTech, Inc.
    04/18/2006
  • Find the real cause of pump gas up

    Simply blaming high feed temperature for inadequate suction isn’t enough when diagnosing pump problems. Read this article to get a laundry list of causes for pump gas up.

    Andrew Sloley, contributing editor
    04/17/2006
  • Pump Start-Ups

    There are only three things we need to do to start a pump.

    Ross Mackay
    01/09/2006
  • Pumps benefit from a vane effort

    Widely used but underappreciated, back pump-out vanes extend bearings and seal life.

    Richard Nardone, ITT Industrial & BioPharm Group
    11/15/2005
  • pH linearization lubricates waste control

    Learn how a simplified technique for linearizing pH can enhance control in waste treatment applications and eliminate the need for gain-adjusting techniques.

    11/15/2005
  • Dig Deeper to Find More Capacity

    Pipeline simulation software can uncover hidden causes of capacity bottlenecks.

    Todd J. Willman, EPCON International, Reuben Gates, Shell Chemical LP, and Mark Haboian, Eastman Kodak Co.
    11/09/2005
  • Find the best value seal

    A new industry-developed tool provides insights and practical guidance on seal economics.

    Pete Petrunich
    10/18/2005
  • Flow Meter Focus

    ChemicalProcessing.com introduces Flow meter focus, a compilation of useful articles, news, white papers and product information related to flow meters.

    09/28/2005
  • Saving energy with fluid handling

    This article from Ross Mackay, an exclusive contributor to ChemicalProcessing.com and author of The Practical Pumping Handbook, discusses how you can save energy in your plant with proper pump selection.

    Ross Mackay
    09/20/2005
  • Become a PSAT Qualified Pump Specialist

    The Hydraulic Institute and the U.S. Department of Energy have partnered to offer a two-day PSAT Qualification Workshop to be held September 7-8 in Dallas, Texas.

    07/18/2005
  • Use operators to boost pump reliability

    Preventing pump problems before they happen is the best way to save costs, and it is the operators who are the key to your pump maintenance.

    Ross Mackay
    06/15/2005
241-260 of 307 < first | | | last >