Articles

861-880 of 1062 < first | | | last >
  • Properly protect control systems

    Integrated digital field networks are increasingly popular but pose particular safety and security risks. Fortunately, a number of parallel activities are underway to make integration between automation and business systems effective, safe and secure.

    Ian Verhappen, MTL Instruments
    06/14/2007
  • Hardening plants is hard work

    Industry should welcome the new, first-ever federal security rules, advises Editor in Chief Mark Rosenzweig in this month's From the Editor column.

    Mark Rosenzweig, Editor in Chief
    06/06/2007
  • Uncertain safety

    Users seeking appropriate process safety systems aren’t getting enough help from unspecific standards and ideal-world certifications. Here’s how to gain useful safety capabilities in a buyer-beware world.

    06/01/2007
  • Foundation fieldbus in hazardous areas

    Implementing Foundation fieldbus can seem like a daunting task, and when coupled with hazardous-area considerations, may approach information overload; however, it doesn't have to be an explosive concept.

    06/01/2007
  • Wireless: Ready or not

    A lively discussion of the current role of wireless in online condition monitoring.

    06/01/2007
  • Get ready to comply with new security mandates

    New anti-terrorism standards require the Department of Homeland Security to identify and regulate "high-risk chemical facilities." These facilities will be subject to a security vulnerability assessment. Where does your plant fit in with these new standards?

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    05/29/2007
  • Wireless finds its calling

    For maintenance and condition-monitoring, wireless technology offers much more than just reducing or eliminating costs. However, wireless also requires an integrated infrastructure approach rather than independent, proprietary point solutions.

    05/27/2007
  • Plug it in?: The decision to integrate condition monitoring

    Efforts to tighten communications of condition-monitoring instrumentation and data analysis software with CMMS and automation infrastructure, combined with the proliferation of wireless sensor systems and the drive to reduce manpower skill and time requirements, are bringing implementation costs down and drawing much attention to this approach. But should you implement it?

    05/27/2007
  • What Works: Wireless PCs streamline warehouse operations

    The basic principles of Lean Manufacturing date back at least to the 18th century. In Poor Richard's Almanack, Benjamin Franklin wrote, “He that idly loses 5s. [shillings] worth of time, loses 5s., and might as prudently throw 5s. into the river. He that loses 5s not only loses that sum, but all the other advantages that might be made by turning it in dealing, which, by the time a young man becomes old, amounts to a comfortable bag of money.”

    05/27/2007
  • Gamma scanning seeks an inside edge

    Many companies decide not to build up certain capabilities in-house mainly because they don’t have sufficient regular demand for them. Gamma scanning of distillation columns is a case in point, but on-site scanning specialists may be the wave of the future.

    Mike Spear, editor at large
    05/08/2007
  • What’s in the air for continuous emissions monitoring?

    More attention to mercury and increased acceptance of predictive approaches is emerging. Such monitoring not only can keep plants on the right side of regulators but also can help provide insights for optimizing operation of equipment.

    Mike Spear, editor at large
    04/13/2007
  • Cost estimating for process analyzer projects

    This article addresses cost estimating for capital projects on which an analyzer system is installed, through start-up and commissioning of the project, to the resultant lifetime cost savings that can be gained.

    Gary D. Nichols, PE, Principal Control Systems Engineer, Jacobs Engineering Group
    03/30/2007
  • Come together

    Integration of plant-floor, building, physical security, and enterprise network means more changes for unathorized access and more need for intelligent security, cooperation, and training.

    Jim Montague, Executive Editor
    03/30/2007
  • Equipment & Services: March

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    03/28/2007
  • Don’t let parallel pumps cross you up

    Small differences with parallel pumps can lead to big difficulties, according to Andrew Sloley in this month's Plant InSites column.

    Andrew Sloley, contributing editor
    03/28/2007
  • Get full value from partial stroking

    There are two main drivers for partial stroking of valves in safety systems: the desire to extend manual test intervals to as long as possible; and to reduce the amount of redundant hardware required for higher safety integrity levels. Like most things in life, it all boils down to one thing: trying to save money.

    Paul Gruhn, ICS Triplex
    03/20/2007
861-880 of 1062 < first | | | last >