Articles

1601-1620 of 1959 < first | | | last >
  • Get answers to your biomonitoring questions

    Guidance for chemical manufacturers, processors, and distributors about Section 8(e) of the Toxic Substances control act was issued on September 14, by the U.S. Environmental Protection Agency (EPA). Chemical Processing's Regulatory Editor Lynn Bergeson discusses the new regulation.

    Lynn Bergeson, regulatory editor
    10/24/2006
  • Implementing an operations management system

    Things are changing at warp speed. Manufacturing companies are collecting large volumes of data from data systems but improvements are possible only if the data are analyzed and developed into useful business parameters.

    Robert Wojewodka, The Lubrizol Corp.
    09/29/2006
  • Washington targets plant security

    Federal actions undoubtedly will markedly impact the chemical industry. Nevertheless, we don’t know at this point whether federal chemical security legislation will happen in 2006.

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    09/22/2006
  • Material Handling: Ensure Proper Silo Design

    Designing equipment for solids is not an exact science. The flows of gases and liquids are generally better understood than those of solids. Most production problems arise from flaws in the design. This article presents questions you can ask yourself to ensure reliable flow in your silo.

    Joseph Marinelli, Solids Handling Technologies, Inc.
    09/22/2006
  • Intellectual property issues limit university research

    Colleges must slake their thirst for royalties as intellectual property issues limit industry-backed university research, according to Chemical Processing's Editor at Large Mike Spear.

    Mike Spear, editor at large
    09/21/2006
  • Choosing the right contract

    A contract can be a stone in your shoe. Knowing which type of contract to choose can make your job easier. Chemical Processing's Senior Editor Dirk Willard provides tips on various types of contracts.

    Dirk Willard, senior editor
    09/20/2006
  • Boiling water is easy as one, two, three, four

    There’s more to boiler level control than measuring level and adjusting a feedwater valve. Improved measurements and inverse response are just a few of the influences on operating boilers in a reliable manner.

    David W. Spitzer
    09/15/2006
  • CAGI to verify compressor claims

    The compressed air industry is taking a step that will clear the air about the performance of its equipment. For the first time, many compressed air equipment manufacturers will submit their 50 hp to 200 hp lubricated rotary-screw compressors and 200 cfm to 1,000 cfm refrigerated air dryers to an independent laboratory for performance testing.

    Ken Byrd
    09/11/2006
  • Implementation fatigue

    The new market realities of higher and rising energy costs as well as global pressures to reduce fossil fuel intensity have made energy management tracking much more valuable. Learn how to keep energy productivity programs from running out of gas in Peter Garforth's latest Energy Expert column.

    Peter Garforth
    09/11/2006
  • The rise and fall of modulation

    Why have reciprocating designs fallen out of favor relative to the rotary compressor that is so predominant today? Read about the evolution of efficient controls for compressed air systems.

    Henry Kemp
    09/11/2006
  • Innovations in batching, dosing and weighing

    Challenges brought on by new regulations and technical problems for batching, dosing and weighing have pushed users to find some innovative and surprising solutions beyond our own industry.

    09/05/2006
  • Succeed at bioprocess scale-up

    While fermentation-based syntheses were once reserved for producing high-value specialty chemicals and biopharmaceuticals, bioprocess routes now are gaining increasing attention for commodity products.

    John L. Shaw, P.E., and Scott A. Rogers, P.E., CH2MHill Lockwood Greene
    08/28/2006
  • Energy savings are often disguised as problems

    Carefully managing compressed air can save money. Compressed air is often overlooked in energy studies because many people do not fully understand compressed air equipment, their own system, or what it costs to produce compressed air power.

    Scott Van Ormer and Don Van Ormer, senior application engineers, Air Power USA
    08/18/2006
  • Improve your approach to hazardous materials

    Committing a significant level of resources to dealing with hazardous materials can be difficult for small companies. Learn to focus on developing an accurate inventory and gain a strategic advantage.

    Jess Kraus and Michael Beckel, 3E Company
    08/18/2006
  • Twisting the dragon's tail

    Complacency is a problem when violating safety rules has no repercussions.

    Dirk Willard, senior editor
    08/18/2006
  • Don’t Be the Hub of a Wheel

    Successful ‘green-field’ site start-ups depend on developing a team, says Senior Editor Dirk Willard.

    Dirk Willard, senior editor
    08/17/2006
  • The impact of the European Union's directives on the U.S.

    The Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (the RoHS Directive) is part of a growing wave of European Union product-based regulations that will profoundly impact global and United States product standards — and thus the chemical industry.

    Lynn Bergeson, regulatory editor
    08/17/2006
1601-1620 of 1959 < first | | | last >