Articles

781-800 of 898 < first | | | last >
  • Intellectual property issues limit university research

    Colleges must slake their thirst for royalties as intellectual property issues limit industry-backed university research, according to Chemical Processing's Editor at Large Mike Spear.

    Mike Spear, editor at large
    09/21/2006
  • Security poses an inherent industry dilemma

    Industry faces the threat of draconian demands from Congress as chemical plants remain an attractive targets for terrorism attacks, according to Mark Rosenzweig, editor in chief of Chemical Processing.

    Mark Rosenzweig, editor in chief
    09/21/2006
  • Column configuration can cripple performance

    The importance of having the inherent capability to meet operating requirements and enable proper instrumentation performance is stressed by Contributing Editor Andrew Sloley.

    Andrew Sloley, contributing editor
    09/21/2006
  • NeSSI tames the communications monster

    The new sampling/sensor initiative (NeSSI) is moving steadily to fulfill its original promise of increased efficiencies, costs-savings, and micro-analytic capabilities despite recent growing pains related to fieldbus.

    Jim Montague, Executive Editor
    09/15/2006
  • Sasol plant benefits from reliability improvements

    Sasol Solvents reduced operating costs by more than $2 million dollars at it’s plants in Sasolburg, South Africa. The efforts earned the facility the 2005 HART Plant of the Year Award.

    Dirk Willard, senior editor
    09/14/2006
  • Process analysis gains greater online role

    Faster. Smaller. Smarter. Modular. All express the future of process analytics. And un-stoppable describes the ongoing migration of process analytical instruments to continuous, online, field-mounted use at chemical plants.

    C. Kenna Amos, contributing editor
    09/11/2006
  • Remember the old reliable orifice plate

    The cost-effective dP flow meter is ideal for utility surveys, Senior Editor Dirk Willard says in this month's Chemical Processing Field Notes column.

    Dirk Willard, senior editor
    09/11/2006
  • Biomonitoring gets a going-over

    The current state of biomonitoring is detailed in the much anticipated report issued July 24 by the Committee on Human Biomonitoring for Environmental Toxicants of the National Academies, Washington, D.C.

    Lynn Bergeson, regulatory editor
    09/11/2006
  • The Ch in ChE stands for “Changing”

    Chemical engineers know all about the laws of supply and demand. After all, the chemical industry, which historically has employed the bulk of chemical engineers, is cyclical.

    Mike Spear, editor at large
    08/28/2006
  • Energy savings are often disguised as problems

    Carefully managing compressed air can save money. Compressed air is often overlooked in energy studies because many people do not fully understand compressed air equipment, their own system, or what it costs to produce compressed air power.

    Scott Van Ormer and Don Van Ormer, senior application engineers, Air Power USA
    08/18/2006
  • Cutting the wires of communications

    Users want wireless, vendors want to sell wireless, so what’s the problem? This article tackles one of the most discussed topics: the use of wireless communications in process automation.

    Walt Boyes, Editor in Chief
    08/15/2006
  • Can U.S. chemical makers still compete?

    A steady stream of statistics in recent years has pointed to deteriorating competitiveness in the U.S. chemical industry. Domestic producers face global challenges but see opportunities.

    Bill Gerards, contributing editor
    07/24/2006
  • Kayo cavitation

    Checking pump performance curves is one of the first steps in troubleshooting a centrifugal pump problem or seeing if a pump can handle new service conditions. Learn to look for more than just insufficient NPSHA, the common culprit, when investigating cavitation.

    Andrew Sloley, contributing editor
    07/17/2006
  • Level transmitter — art not science

    There is much more to setting up a transmitter than a mere equation. Design and control errors can certainly compromise performance. Follow these simple tricks to get it right.

    Dirk Willard
    06/13/2006
  • Distillation control and optimization, Part 1

    Control columnist Bela Liptak describes the distillation process and PID-based controls, reviews optimization strategies, and shows how advanced controls can cut operating costs of distillation.

    Béla Lipták, PE, Control Columnist
    01/11/2006
  • Keep lobes in mind

    Understand why and when to consider these positive-displacement pumps.

    John Hall, Viking Pump, Inc.
    01/03/2006
781-800 of 898 < first | | | last >