Articles

301-320 of 408 < first | | | last >
  • Monthly Preview: December 2007

    Here's a look at what will soon be featured on ChemicalProcessing.com. Be sure to check back for the latest articles, news and columns before you see it in print.

    10/02/2007
  • Equipment & Services: August

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    08/22/2007
  • Candidate contaminants get reprieve

    EPA decides not to regulate 11 materials in water. Read what Regulatory Editor Lynn Bergeson says about it in this month's Compliance Advisor column.

    Lynn Bergeson, regulatory editor
    08/01/2007
  • New seals get their turn

    As pressure rises on plants to improve productivity and equipment reliability levels, seals and gaskets are being called upon to provide even better performance. Their challenge no longer is simply to prevent leaks but also to play an important role in the life-cycle management of the plant.

    Mike Spear, editor at large
    07/24/2007
  • Equipment & Services: July

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    07/24/2007
  • Properly protect centrifugal pumps

    Consider various factors when selecting how to guard against low flow, Andrew Sloley says in this month's Plant Insites column.

    Andrew Sloley, contributing editor
    07/11/2007
  • DHS aims to lock down security rules

    Expect a final ruling this summer on chemicals covered and some other key issues, warns Lynn Bergeson, regulatory editor.

    Lynn Bergeson, regulatory editor
    07/06/2007
  • Equipment & Services: June

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    06/07/2007
  • Equipment & Services: May

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    05/08/2007
  • Control valves for slurry service

    In this installment of Ask The Experts, noted process control authority and CONTROL Columnist Béla Lipták and his cadre of automation experts answer a reader’s question regarding control valves for slurry services.

    05/01/2007
  • Optimize pump life cycle

    Understanding an operating system reduces costs and improves reliability. Getting the most out of your pump demands a well-thought-out, holistic strategy.

    Tom Carsten and Barry Erickson, Flowserve
    04/30/2007
  • Final control

    What’s the latest on control valves? Here's a look at the current marketplace for the final element that all control stuff is aimed at—the control valve that produces the end result.

    Walt Boyes, Editor in Chief
    04/17/2007
  • Choose the right fluid for your pressure test

    Compressed gas often makes the most sense for checking a process, according to Senior Editor Dirk Willard, in this month's Field Notes column.

    Dirk Willard, senior editor
    04/12/2007
  • Get full value from partial stroking

    There are two main drivers for partial stroking of valves in safety systems: the desire to extend manual test intervals to as long as possible; and to reduce the amount of redundant hardware required for higher safety integrity levels. Like most things in life, it all boils down to one thing: trying to save money.

    Paul Gruhn, ICS Triplex
    03/20/2007
  • Tips and traps

    Following some partial stroke testing tips can make the process easier. Read on for more tips.

    Paul Gruhn, ICS Triplex
    03/20/2007
  • Compelling reasons to choose an insertion magnetic flow sensor

    Measuring flow rates and volumes of water and chemicals in the water, wastewater and chemical treatment industries requires the latest, simple to use and cost-effective technology that can keep up with the rigorous demands of the various applications.

    03/14/2007
  • Make your portable mixer work for you

    Understanding the fundamentals of fluid agitation can help meet the customer’s requirement and the processor’s need for efficiency. While portable mixers have been around for years, they often aren’t used to their full potential. Knowing the basics of mixing and flow patterns can help you get more out of your mixer.

    David Dickey, MixTech, Inc. and Lydia Booth Fenley, Illes Seasonings & Flavors
    03/06/2007
  • pH sensor stands up to tough conditions

    Design provides improved reliability in a polymer-precursor batch reactor. Sensors must respond quickly and survive a harsh environment. Poor probe reliability can make the difference between a process that makes money and one that doesn’t.

    Kyle Becker, Polychemie
    01/08/2007
301-320 of 408 < first | | | last >