Articles

101-120 of 136 < first | | | last >
  • Don’t shackle yourself to the wrong platform

    Today, process data are readily available at many levels, from instrumentation to higher-level data historians and OPC servers. Choosing the right platform can be key to successfully implementing robust and maintainable process calculations at your company.

    Dane Overfield, Exele Information Systems
    03/14/2007
  • Keep measurements on the level

    This article looks at six technologies — mechanical floats and displacers, differential pressure, capacitance, ultrasonic, radar, and guided wave radar — that are used most often for automated control, and provides practical guidance for choosing among them.

    Jerry Boisvert, Siemens Energy & Automation
    11/01/2006
  • Implementing an operations management system

    Things are changing at warp speed. Manufacturing companies are collecting large volumes of data from data systems but improvements are possible only if the data are analyzed and developed into useful business parameters.

    Robert Wojewodka, The Lubrizol Corp.
    09/29/2006
  • Today’s China Syndrome

    The country boasts not just booming exports but a strong desire for the best technology.

    Mike Spear, editor at large
    09/27/2005
  • Process engineering: Digital data recorders deliver

    This contribution from ControlGlobal.com compares mechanical, analog and digital recorders for data acquisition and concludes that local data logging can be the easiest way to satisfy regulatory requirements.

    05/11/2005
  • Process engineering: Dryer provides a concrete lesson in control

    Removing water or moisture from a liquid stream is a critical operation in many processes. Liquid stream dryers commonly contain either molecular sieves or adsorbents; during the last 20 years, the use of molecular sieves has become much more common.

    Andrew Sloley, contributing editor, and Richard Readshaw, senior staff process engineer for VECO USA Inc.
    05/03/2005
  • Process engineering: Doing your level best

    Plant engineers who find it is difficult to get good level measurements have plenty of company. A recent poll shows that it is considered to be one of the two most vexing problems by process automation professionals.

    04/08/2005
  • Chemical research gets a new look

    Editor at large Nick Basta looks at what the chemical industry can do to re-invigorate its technological research. He says technology pioneered in the pharmaceutical industry promises broad benefits.

    03/11/2005
  • Process engineering: In the trenches of Fieldbus War II

    Like the 20th Century’s Great Conflict, the first Fieldbus War never really ended. But what will the outcome be this time? This article from CONTROL makes an educated prediction on how the battle may turn out.

    03/10/2005
  • Process Engineering: Measure problems on a higher level

    A reader has a level measurement problem with a differential pressure level transmitter. The transmitter does not track the level properly. Check out the question and the in-depth answer in this contribution from ControlGlobal.com.

    03/03/2005
  • Process Engineering: Looking for good data?

    Are you experiencing problems with measurement uncertainty and are often left with poor data? Let Dr. Gooddata help you develop objective numerical tests for good data.

    Ronald H. Dieck, Ron Dieck Associates Inc.
    02/04/2005
  • Process engineering: Doing your level best

    Level measurement can be a simple issue with numerous solutions.  Measuring the height of the material in a vessel is merely an interface issue that can be resolved in a variety of ways.

    01/21/2005
101-120 of 136 < first | | | last >