Articles

101-120 of 147 < first | | | last >
  • Monthly Preview: December 2007

    Here's a look at what will soon be featured on ChemicalProcessing.com. Be sure to check back for the latest articles, news and columns before you see it in print.

    10/02/2007
  • Equipment & Services: October

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    10/01/2007
  • Diagnostics dig deeper

    Today’s plants come ready equipped with their own team of doctors in the shape of the many diagnostic and monitoring systems incorporated into instrumentation and other process equipment. And, like any good doctor, today’s plant diagnostics can look beyond the symptoms of poorly performing instruments and provide insights into the health of the process itself.

    Mike Spear, editor at large
    08/20/2007
  • Biomass fuel production gets sweeter

    Improved instrumentation and control strategies allow biofuel producers to reap the benefits of new processing techniques and advanced control strategies.

    David W. Spitzer, CONTROL Contributor
    07/01/2007
  • Achieve continuous safety improvement

    Enhancing safety performance requires diligence and unrelenting effort. The Independent Safety Review Panel’s recently released report on the safety culture and practices at BP’s U.S. refineries where a March 2005 explosion occurred in Texas City, Texas indicates similar failings are likely elsewhere in the industry. Learn what can be done to enhance continuous safety improvement.

    Angela Summers, SIS-TECH Solutions
    04/12/2007
  • Equipment & Services: March

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    03/28/2007
  • Don’t shackle yourself to the wrong platform

    Today, process data are readily available at many levels, from instrumentation to higher-level data historians and OPC servers. Choosing the right platform can be key to successfully implementing robust and maintainable process calculations at your company.

    Dane Overfield, Exele Information Systems
    03/14/2007
  • Distillation control and optimization, Part 3

    Control's Béla Lipták continues his series on control of distillation processes, this time focusing on managing reboiler flow, temperature, feed rate, loading and reflux for economy, stability and safety.

    Béla Lipták, PE, CONTROL Columnist
    01/05/2007
  • Keep measurements on the level

    This article looks at six technologies — mechanical floats and displacers, differential pressure, capacitance, ultrasonic, radar, and guided wave radar — that are used most often for automated control, and provides practical guidance for choosing among them.

    Jerry Boisvert, Siemens Energy & Automation
    11/01/2006
  • Level transmitter — art not science

    There is much more to setting up a transmitter than a mere equation. Design and control errors can certainly compromise performance. Follow these simple tricks to get it right.

    Dirk Willard
    06/13/2006
  • Choose the right temperature sensor

    There’s no simple solution to achieving accurate temperature measurement. It’s a combination of knowing the inherent accuracy of particular sensor types, and how environmental factors can create further measurement uncertainty and the sensor calibration techniques available to reduce this uncertainty.

    Cal Swanson, Watlow Electric Manufacturing Co.
    04/24/2006
  • Today’s China Syndrome

    The country boasts not just booming exports but a strong desire for the best technology.

    Mike Spear, editor at large
    09/27/2005
  • Process engineering: Dryer provides a concrete lesson in control

    Removing water or moisture from a liquid stream is a critical operation in many processes. Liquid stream dryers commonly contain either molecular sieves or adsorbents; during the last 20 years, the use of molecular sieves has become much more common.

    Andrew Sloley, contributing editor, and Richard Readshaw, senior staff process engineer for VECO USA Inc.
    05/03/2005
  • Process Engineering: HART – Dealing with device description

    There is a myth surrounding HART devices that you'll need a device description to communicate with a HART device. Learn why this isn't true and what you do need to know in operating a HART communication device.

    Ed T. Ladd, Jr.
    04/12/2005
  • Process engineering: Doing your level best

    Plant engineers who find it is difficult to get good level measurements have plenty of company. A recent poll shows that it is considered to be one of the two most vexing problems by process automation professionals.

    04/08/2005
  • Process Manufacturing Workforce: Don't Be Thrown for a Loop

    When processing chemicals, it has become increasingly important to isolate the process from the work environment. The agitated filter dryer accomplishes this by providing a high degree of containment.

    Ian Nimmo and John Moscatelli, User Centered Design Services LLC
    04/08/2005
101-120 of 147 < first | | | last >