Articles

1601-1620 of 1889 < first | | | last >
  • Pump start-ups

    As the new year starts up for contributor Ross Mackay, he is reminded of a pump start-up condition he encountered in a client's plant.

    Ross Mackay
    01/09/2006
  • Keep lobes in mind

    Understand why and when to consider these positive-displacement pumps.

    John Hall, Viking Pump, Inc.
    01/03/2006
  • Design methods for reflux condensers

    Reflux condensers have become increasingly important to eliminate condensable organic components from plant off-gas streams and meet environmental requirements. Recognizing this need, HTRI conducted an experimental and analytical study in the late 90s to predict flooding, as well as heat transfer and pressure drop in vertical intube reflux condensers.

    Zhi Hua (Frank) Yang
    12/01/2005
  • Evaluate reactivity with limited resources

    The initial critical steps of reactivity risk reduction need not be expensive, time consuming and require extensive expertise.

    W. J. Rogers, C. Wei and M. S. Mannan, Mary Kay O’Connor Process Safety Center
    11/27/2005
  • EPA seeks to reduce TRI reporting burden

    The EPA has proposed a new act in regards to reducing Toxics Release Inventory (TRI). Read here to get the details on how it might affect your plant.

    Lynn Bergeson, regulatory editor
    11/27/2005
  • Dig Deeper to Find More Capacity

    Pipeline simulation software can uncover hidden causes of capacity bottlenecks.

    Todd J. Willman, EPCON International, Reuben Gates, Shell Chemical LP, and Mark Haboian, Eastman Kodak Co.
    11/09/2005
  • The Synergy of Simulation, Experimentation and Technical Support Activities in a Research Consortium

    For the business of designing process heat exchangers, computational fluid dynamics (CFD) tools are still not practical for everyday use. However, in a research consortium such as HTRI, integrating advanced analysis tools like CFD with industrial-sized experimentation and then applying them to real-world technical problems provides a significant synergistic benefit to the consortium members.

    Kevin J. Farrell
    11/06/2005
  • Boost maintenance staff efficiency

    Many plants strive to increase the efficiency of maintenance craftspeople, but find it hard to identify where to focus efforts and how to track progress.

    Timothy J. Finigan, Fluor
    10/25/2005
  • Optimize Water Use

    Four major drivers are spurring increasing interest in optimizing water use.

    Tabatha Pellerin and John Woodhull, ENSR International
    10/25/2005
  • Your job is still safe... for now

    With mechanical simulation tools, one engineer can do the work of an entire staff. With chemical processes, however, simulation tools aid the staff — but don’t replace it…yet.

    10/25/2005
  • Joint sealants a viable gasketing option

    While users can now achieve better sealing performance to meet specific needs, the gasket qualification and selection process has become more challenging.

    10/18/2005
  • Choosing motor controls and drives

    In any industrial control application, using the right drives and motor controls can make or break the project, and also can make a huge difference in how well those applications perform.

    10/18/2005
1601-1620 of 1889 < first | | | last >