Articles

61-80 of 97 < first | | | last >
  • Equipment & Services: August

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    08/22/2007
  • Equipment & Services: July

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    07/24/2007
  • Optimize pump life cycle

    Understanding an operating system reduces costs and improves reliability. Getting the most out of your pump demands a well-thought-out, holistic strategy.

    Tom Carsten and Barry Erickson, Flowserve
    04/30/2007
  • Waylay weight woes

    Production managers, quality control managers and maintenance engineers alike have encountered weigh cells that never worked properly. Why? Why have so many switched from a supposedly high accuracy load cell solution to old fashioned level probes or sight glasses? This article touches on the worst culprits for problems and how to avoid them.

    Ryan Titmas, product manager, Sartorius North America
    01/08/2007
  • Avoid trouble with slurries

    Handling slurries (a mix of solids and liquids), should be based on experience and experiments, not theory. Much of the knowledge obtained from pneumatic conveyors and fluidization systems can be used in understanding slurries.

    Thomas R. Blackwood, Healthsite Associates
    11/01/2006
  • Innovations in batching, dosing and weighing

    Challenges brought on by new regulations and technical problems for batching, dosing and weighing have pushed users to find some innovative and surprising solutions beyond our own industry.

    09/05/2006
  • Get a handle on solids’ flow

    Properly accounting for how bulk solids actually will flow in a vessel or overall process can be crucial for successful operations. Learning some simple parameters can often provide a good sense of flowability.

    Don McGlinchey, Glasgow Caledonian University
    05/22/2006
  • Mind Mixer Mechanical Design

    While most mixers can provide a long service life — for instance, some are still operating after more than 30 years — mechanical problems can shorten life or even break parts. In this article, learn about all the mechanical problems that may befall your mixing equipment.

    David S. Dickey, MixTech, Inc.
    04/18/2006
  • Don't Let Phase Changes Faze You

    Phase changes in the downstream processing or handling of solids cause many process problems that have inexpensive solutions.

    Tom Blackwood, Healthsite Associates LLC
    10/04/2005
  • Build up agglomerate quality

    Several easy-to-use indices related to material flow properties can help to predict and improve an agglomeration process and product quality.

    Kristin O’Quest and Lee Dudley, Diamondback Technology, Inc.
    08/31/2005
  • Don'’t Get Mixed Up By Scale-Up

    Use this systematic approach to successfully scale-up mixing processes even without geometric similarity.

    David S. Dickey, MixTech, Inc.
    08/04/2005
  • Powder Handling: How to Reduce Caking Problems

    This web-exclusive article from Diamondback Technology identifies the most common caking mechanisms and how to solve the problem through reduction.

    Diamondback Technology
    07/05/2005
  • Avoid confusion with air injection for fine powders

    Fine powders often need air injection to increase flow rates to an acceptable level. With entrained or injected air, powders flow like water, but when deaerated, the extremely low flow rate may be confused with a hang-up or arching condition.

    06/01/2005
61-80 of 97 < first | | | last >