Articles

41-60 of 84 < first | | | last >
  • Streamline Your Sampling System

    Selecting the right stream selection assembly can improve performance.

    John Wawrowski, Doug Nordstrom and Joel Feldman, Swagelok Co.
    04/03/2009
  • 2008 Powder Show Round Up

    From the 2008 Powder Show: Mark Rosenzweig and Ken Schnepf bring you video interviews from Anhydro, Arizona Instrument, Gardner Denver, K-Tron and Readco Kurimoto

    05/28/2008
  • Portable conveyor speeds paint production

    Unit ensures a consistent flow of soft acrylic powder without lumps or sticking, improving the production of thermoplastic paint.

    Michel Podevyn, Spiroflow Systems, Inc.
    10/30/2007
  • Disposable equipment earns lasting role

    Improvements in materials and processing know-how have led to a steady increase in the use of single-use or disposable equipment.

    Seán Ottewell, contributing editor
    10/04/2007
  • Monthly Preview: December 2007

    Here's a look at what will soon be featured on ChemicalProcessing.com. Be sure to check back for the latest articles, news and columns before you see it in print.

    10/02/2007
  • Get the right cartridge or bag filter

    An inaccurately sized or improperly specified filter can undermine an entire high-performance liquid filtration system. There are a dozen key parameters to assess to determine the proper specification.

    Tim Mills, Kaydon Custom Filtration Corp.
    09/04/2007
  • Avoid blending blunders

    Selecting the correct device is crucial to successfully handling solids. It must deal with discrete pieces that have physical size, electrical properties, frictional differences and surface characteristics that can change with the environment.

    Tom Blackwood, Healthsite Associates
    09/04/2007
  • Equipment & Services: August

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    08/22/2007
  • Equipment & Services: July

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    07/24/2007
  • Optimize pump life cycle

    Understanding an operating system reduces costs and improves reliability. Getting the most out of your pump demands a well-thought-out, holistic strategy.

    Tom Carsten and Barry Erickson, Flowserve
    04/30/2007
  • Waylay weight woes

    Production managers, quality control managers and maintenance engineers alike have encountered weigh cells that never worked properly. Why? Why have so many switched from a supposedly high accuracy load cell solution to old fashioned level probes or sight glasses? This article touches on the worst culprits for problems and how to avoid them.

    Ryan Titmas, product manager, Sartorius North America
    01/08/2007
  • Avoid trouble with slurries

    Handling slurries (a mix of solids and liquids), should be based on experience and experiments, not theory. Much of the knowledge obtained from pneumatic conveyors and fluidization systems can be used in understanding slurries.

    Thomas R. Blackwood, Healthsite Associates
    11/01/2006
  • Innovations in batching, dosing and weighing

    Challenges brought on by new regulations and technical problems for batching, dosing and weighing have pushed users to find some innovative and surprising solutions beyond our own industry.

    09/05/2006
  • Get a handle on solids’ flow

    Properly accounting for how bulk solids actually will flow in a vessel or overall process can be crucial for successful operations. Learning some simple parameters can often provide a good sense of flowability.

    Don McGlinchey, Glasgow Caledonian University
    05/22/2006
41-60 of 84 < first | | | last >