Articles

141-160 of 180 < first | | | last >
  • Keep a steady eye on measurements

    While engineers often strive to keep processes running without too much variation, measurements that don’t change may be a cause for concern not celebration, as one refinery can attest.

    Andrew Sloley, contributing editor
    06/19/2006
  • Pumping Temperature Considerations

    "Bad actor" pumps are those pumps that have trouble with frequent and repetitive failures. In many cases, the source of the problem is an ANSI pump trying valiantly to handle a liquid well beyond the range of its design rating.of 300 degs. F.

    Ross Mackay
    06/19/2006
  • Pumps benefit from a vane effort

    Widely used but underappreciated, back pump-out vanes extend bearings and seal life.

    Richard Nardone, ITT Industrial & BioPharm Group
    11/15/2005
  • pH linearization lubricates waste control

    Learn how a simplified technique for linearizing pH can enhance control in waste treatment applications and eliminate the need for gain-adjusting techniques.

    11/15/2005
  • Find the best value seal

    A new industry-developed tool provides insights and practical guidance on seal economics.

    Pete Petrunich
    10/18/2005
  • Flow Meter Focus

    ChemicalProcessing.com introduces Flow meter focus, a compilation of useful articles, news, white papers and product information related to flow meters.

    09/28/2005
  • Process Industry Practices 9th Annual Conference

    The theme for this year’s PIP Conference was “Changing Times – The Common Denominator”. With over 140 registered attendees the conference included participants from member, subscriber, and licensee companies as well as other invited guests from the industry.

    Process Industry Practices
    05/10/2005
  • Compressed Air Systems: The Secret is in the Pipe

    There’s no such thing as too large a compressed air line.  A common error in compressed air systems is line sizes too small for the desired air flow.

    Hank van Ormer, Don van Ormer and Scott van Ormer
    03/14/2005
  • Process engineering: Avoid pitfalls when starting up pumps

    Improper startup can result in excessive temperature and radial loading, both of which can lead to lower pump reliability from problems such as seal and bearing failure. Consultant Ross Mackay describes the three steps that should be followed during pump startup.

    03/14/2005
  • HART Devices - Dispelling the Myths

    Myths and misconceptions surround the HART Communication technology despite being in use for as many as 15 years in some places. This article dispels those myths and highlights the benefits of HART.

    Ed T. Ladd, Jr., HART Communication Foundation, Austin, Texas
    03/10/2005
141-160 of 180 < first | | | last >