Articles

101-120 of 144 < first | | | last >
  • Hardening plants is hard work

    Industry should welcome the new, first-ever federal security rules, advises Editor in Chief Mark Rosenzweig in this month's From the Editor column.

    Mark Rosenzweig, Editor in Chief
    06/06/2007
  • What is taking so long?

    Despite its 30-plus-year history, advanced process control (APC) applications remain few and far between, but it doesn’t need to be that way. Dave Harrold, cofounder of the AFAB Group, reports.

    06/01/2007
  • Get ready to comply with new security mandates

    New anti-terrorism standards require the Department of Homeland Security to identify and regulate "high-risk chemical facilities." These facilities will be subject to a security vulnerability assessment. Where does your plant fit in with these new standards?

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    05/29/2007
  • Control valves for slurry service

    In this installment of Ask The Experts, noted process control authority and CONTROL Columnist Béla Lipták and his cadre of automation experts answer a reader’s question regarding control valves for slurry services.

    05/01/2007
  • Come together

    Integration of plant-floor, building, physical security, and enterprise network means more changes for unathorized access and more need for intelligent security, cooperation, and training.

    Jim Montague, Executive Editor
    03/30/2007
  • Chemical security rules edge forward

    Advance rulemaking was recently issued on anti-terrorism standards. Lynn Bergeson provides a summary in monthly Compliance Advisor column.

    Lynn Bergeson, regulatory editor
    02/12/2007
  • 10 tips for diagnosing control valve problems

    To make the most of diagnostic equipment used in chemical processing, technicians must stretch their knowledge of control valves and related diagnostic equipment that keeps tabs on valve health and safety.

    David W. Douglas
    01/22/2007
  • Distillation control and optimization, Part 3

    Control's Béla Lipták continues his series on control of distillation processes, this time focusing on managing reboiler flow, temperature, feed rate, loading and reflux for economy, stability and safety.

    Béla Lipták, PE, CONTROL Columnist
    01/05/2007
  • Raising the bar for control system security

    Security researchers at Wurldtech Analytics are partnering with ISA to establish procedures and an operations model for the security testing and certification of products used for control.

    Eric and Joann Byres, principals, Wurldtech Analytics
    10/12/2006
  • Washington targets plant security

    Federal actions undoubtedly will markedly impact the chemical industry. Nevertheless, we don’t know at this point whether federal chemical security legislation will happen in 2006.

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    09/22/2006
  • Security poses an inherent industry dilemma

    Industry faces the threat of draconian demands from Congress as chemical plants remain an attractive targets for terrorism attacks, according to Mark Rosenzweig, editor in chief of Chemical Processing.

    Mark Rosenzweig, editor in chief
    09/21/2006
  • HMIs evolve in process control

    New HMI technology is putting a whole new (inter)face on how operators view control systems information, while at the same time driving human error out of systems and improving safe work practices.

    Ian Nimmo, president, User Centered Design Services LLC
    09/11/2006
  • Distillation control and optimization, Part 1

    Control columnist Bela Liptak describes the distillation process and PID-based controls, reviews optimization strategies, and shows how advanced controls can cut operating costs of distillation.

    Béla Lipták, PE, Control Columnist
    01/11/2006
  • 10 principles for securing control systems

    KEMA Consultant Jay Abshier takes an unbiased and highly detailed look at where plant security really is, and what is being done to better protect our process automation systems and infrastructure. Print page Email page 10 principles for securing control systems KEMA Consultant Jay Abshier takes an unbiased and highly detailed look at where plant security really is, and what is being done to better protect our process automation systems and infrastructure.

    10/25/2005
  • Getting batch material transfers under control

    Batch material transfer control seems an easy task to carry out, but the reality is that many functions are necessary if the system is to accomplish accurate batch material transfer control. Weighing systems with device-level controls can help.

    08/10/2005
  • Efficient batch control

    Efficient batch control can be both an art and science, so act accordingly for best results, and always remember "it's survival of the fittest" out there.

    07/13/2005
101-120 of 144 < first | | | last >