2001-2020 of 2378 < first | | | last >
  • Innovations in batching, dosing and weighing

    Challenges brought on by new regulations and technical problems for batching, dosing and weighing have pushed users to find some innovative and surprising solutions beyond our own industry.

  • Succeed at bioprocess scale-up

    While fermentation-based syntheses were once reserved for producing high-value specialty chemicals and biopharmaceuticals, bioprocess routes now are gaining increasing attention for commodity products.

    John L. Shaw, P.E., and Scott A. Rogers, P.E., CH2MHill Lockwood Greene
  • Energy savings are often disguised as problems

    Carefully managing compressed air can save money. Compressed air is often overlooked in energy studies because many people do not fully understand compressed air equipment, their own system, or what it costs to produce compressed air power.

    Scott Van Ormer and Don Van Ormer, senior application engineers, Air Power USA
  • Improve your approach to hazardous materials

    Committing a significant level of resources to dealing with hazardous materials can be difficult for small companies. Learn to focus on developing an accurate inventory and gain a strategic advantage.

    Jess Kraus and Michael Beckel, 3E Company
  • Twisting the dragon's tail

    Complacency is a problem when violating safety rules has no repercussions.

    Dirk Willard, senior editor
  • Product stewardship takes a grave turn

    European Union mandates have impacted products produced and sold in the U.S., and will ultimately affect the chemical industry, according to Editor in Chief Mark Rosenzweig.

    Mark Rosenzweig, Editor in Chief
  • Don’t Be the Hub of a Wheel

    Successful ‘green-field’ site start-ups depend on developing a team, says Senior Editor Dirk Willard.

    Dirk Willard, senior editor
  • The impact of the European Union's directives on the U.S.

    The Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (the RoHS Directive) is part of a growing wave of European Union product-based regulations that will profoundly impact global and United States product standards — and thus the chemical industry.

    Lynn Bergeson, regulatory editor
  • 2006 Readers' Choice Survey

    The equipment, services and suppliers selected to make a job easier greatly contribute to on-the-job success. The Readers' Choice survey identifies the leading vendors in more than 40 categories.

    Ken Schnepf, managing editor
  • How to select control valves, Part 1

    When it comes to selecting and sizing control valves, the non-commercial chart in this article not only helps you pick the right one for the job, but also serves as a reference tool you can download.

    Béla Lipták, PE, CONTROL Columnist
  • Cutting the wires of communications

    Users want wireless, vendors want to sell wireless, so what’s the problem? This article tackles one of the most discussed topics: the use of wireless communications in process automation.

    Walt Boyes, Editor in Chief
  • Executing Alarm Management

    For you to succeed in advancing your strategy, while keeping the peace, you must meet many challenges — motivating personnel and juggling the integration of changes. The solution is better plant-wide communication and understanding of the alarm philosophy.

    Roy Tanner, and Rob Turner ABB and Jeff Gould, Matrikon
  • Shake up your processing lines

    Vibratory equipment plays a critical role at many plants and there are significant opportunities to upgrade this equipment.

    Linda Mioduszewski, Eriez Magnetics
  • Try before you buy

    There is another side to toll processing. It involves the companies that arguably have the best possible know-how and hardware — for the simple reason that they are the equipment manufacturers themselves, offering toll processing services that utilize their own products.

    Mike Spear, editor at large
  • Better Design Is No Pipe Dream

    The benefits of using pipeline simulation tools at the piping and instrumentation diagram (P&ID) level, rather than running simulations just on the process flow diagram, can often be overlooked.

    Mike Spear, editor at large
  • Avoid Alarm Blunders

    Ineffective alarm systems pose a serious risk to safety, the environment, and plant profitability. Too often, alarm system effectiveness is unknowingly undermined by poorly-configured alarms. Read about these 12 common mistakes that can undermine the management of your alarm system.

    Michael Marvan
  • Control your maintenance

    Automation systems have now reached such a high degree of reliability that many personnel at plants now take them for granted. Learn to use digital communication with your asset management tools to achieve predictive maintenance and substantial savings.

    Ian Verhappen, MTL Instruments Group
  • Effective Shift Handover Is No Accident

    A successful handover between shifts heavily depends on the organizational skills of management and the effective use of the communication tools available. Learn what these tools are and get the most out of your operators.

    Ian Nimmo, User Centered Design Services, LLC
  • Small sensors promise big impact

    Because many environmental applications of nanotechnology will almost certainly revolutionize the science, law, and regulation of water pollution, readers are urged to keep abreast of this fast-changing area.

    Lynn Bergeson, regulatory editor
2001-2020 of 2378 < first | | | last >