1921-1940 of 2376 < first | | | last >
  • Combat contamination

    Consider the impact of slope, fittings and valves. Plants can lose sizable amounts of money each year because of contamination caused in process lines. Owners and contractors alike can take steps in the design and construction phase to enhance the drainability and cleanability of a system.

    Michael Bridge, Swagelok Company
  • Plant to enterprise – Putting the pieces together

    While improved technology has narrowed the gap, the pressure now is on to complete the plant-floor-to-top-floor link. But the path is a twisty one dogged by complex technical and cultural issues.

    Nancy Bartels, Managing Editor
  • Cost estimating for process analyzer projects

    This article addresses cost estimating for capital projects on which an analyzer system is installed, through start-up and commissioning of the project, to the resultant lifetime cost savings that can be gained.

    Gary D. Nichols, PE, Principal Control Systems Engineer, Jacobs Engineering Group
  • Equipment & Services: March

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

  • Energy management boosts competitiveness

    Energy Saver columnist Christopher Russell advises that you consider all the motives and rewards for managing plant-wide energy consumption.

    Christopher Russell
  • Get full value from partial stroking

    There are two main drivers for partial stroking of valves in safety systems: the desire to extend manual test intervals to as long as possible; and to reduce the amount of redundant hardware required for higher safety integrity levels. Like most things in life, it all boils down to one thing: trying to save money.

    Paul Gruhn, ICS Triplex
  • Tips and traps

    Following some partial stroke testing tips can make the process easier. Read on for more tips.

    Paul Gruhn, ICS Triplex
  • Sample pump eliminates emissions

    A compact system significantly improves analyzer accuracy. This innovative turnkey solution for analyzer emissions is a solid-state pump with an ultra-sensitive pressure regulator that mixes a compatible gas with the analyzer samples to achieve a constant vent header pressure — even during times of plant upset.

    Kazi Hassa, Parker Hannifin
  • Compelling reasons to choose an insertion magnetic flow sensor

    Measuring flow rates and volumes of water and chemicals in the water, wastewater and chemical treatment industries requires the latest, simple to use and cost-effective technology that can keep up with the rigorous demands of the various applications.

  • Don’t shackle yourself to the wrong platform

    Today, process data are readily available at many levels, from instrumentation to higher-level data historians and OPC servers. Choosing the right platform can be key to successfully implementing robust and maintainable process calculations at your company.

    Dane Overfield, Exele Information Systems
  • NeSSI taxis for takeoff

    Though acceptance and networking hurdles remain, the New Sampling/Sensor Initiative (NeSSI) is starting to emerge in real-world, standardized, modular process control applications.

    Jim Montague, Executive Editor
  • The evolution of plant automation

    Understanding the purpose of control and safety systems helps users ensure each is appropriately optimized. The duties of the SIS are to protect the people, environment and assets against unsafe conditions.

    Angela Summers, PhD, PE, founder of SIS-TECH Solutions
  • Pressure control optimization

    Floating pressure control means that, at minimum pressure, the heat required at the reboiler is minimized, its capacity is increased, and fouling is reduced.

    Béla Lipták, PE, CONTROL Columnist
  • Pressure tests can spur successful start-up

    Push it: if it breaks it probably needed to be replaced, says Dirk Williard, in this month's Field Notes column. Doing so can help improve your processes.

    Dirk Willard, senior editor
  • Use a portfolio approach to energy management

    A business plan for industrial energy management is remarkably similar to financial planning, says Christopher Russell in his Energy Saver column.

    Christopher Russell, contributing editor
  • Plants get help in boosting reliability

    More and more companies are placing greater emphasis on maintenance and seeking help from vendors to boost the effectiveness of their efforts, as some recent major investment decisions demonstrate. Many automation companies now are benefiting by building up asset management services alongside process control capabilities.

    Mike Spear, editor at large
1921-1940 of 2376 < first | | | last >