1661-1680 of 2071 < first | | | last >
  • Better water technology is on tap

    The drought in many parts of the U.S. so far this summer points out the preciousness of water supplies. There’s greater demand for waste-minimization and recycle-and-reuse technologies as well as more awareness of utility usage and the impact of life-cycle costs on water-treatment operations. Here’s a look at new technologies that will help.

    C. Kenna Amos, contributing editor
  • Face energy challenges like a frontiersman

    Be both a hunter and a farmer of energy management, advises Contributing Editor Christopher Russell, in this month's Energy Saver column.

    Christopher Russell, contributing editor
  • Properly protect centrifugal pumps

    Consider various factors when selecting how to guard against low flow, Andrew Sloley says in this month's Plant Insites column.

    Andrew Sloley, contributing editor
  • Two bulk conveyors prove better than one

    Engineers at EaglePicher Corp. in Quapak, Okla., faced some unique problems in manufacturing high-purity isotopic chemicals and wound up addressing them via a unique solution.

    David Boger, Flexicon Corp.
  • Squeeze More from Your Motors

    By integrating smart motor control centers that will monitor energy consumption a plant can remove wasteful energy expenditure, prevent unplanned downtime, and improve overall operational efficiency. Recent tax code amendments make these improvements inviting.

    Moin Shaikh, Siemens
  • Protect your electronics

    Ignoring exposed electrical boxes can cost you a bundle, says Contributer Dirk Willard, in this month's Field Notes column.

    Dirk Willard, contributer
  • Get ready to comply with new security mandates

    New anti-terrorism standards require the Department of Homeland Security to identify and regulate "high-risk chemical facilities." These facilities will be subject to a security vulnerability assessment. Where does your plant fit in with these new standards?

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
  • Build your portfolio

    Is energy efficiency an engineering project or a management process? Contributing Editor Christopher Russell answers that question in this month's Energy Saver column.

    Christopher Russell, contributing editor
  • Cut column energy consumption

    With increasing energy prices and public sensitivity to energy consumption, many plants are paying more attention to optimizing distillation. Simple and low-risk operational changes often can provide substantial savings.

    Andrew Sloley, VECO U.S.A.
  • Equipment & Services: May

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

  • Strike the Right Balance

    Make the walk-through your first line of defense, advises Dirk Willard in this month's Field Notes column.

    Dirk Willard, senior editor
  • Dow engineer wins the 3rd annual Plant Innovation Award

    This year’s award goes to Bridget Schoonover, senior improvement specialist for Dow in Freeport, Texas, who led a team that validated and implemented a solution to a source of lost revenue at the plant: a waste stream.

    Dirk Willard, senior editor
  • What’s in the air for continuous emissions monitoring?

    More attention to mercury and increased acceptance of predictive approaches is emerging. Such monitoring not only can keep plants on the right side of regulators but also can help provide insights for optimizing operation of equipment.

    Mike Spear, editor at large
  • Flame Modeling Provides Matchless Results

    A computer simulation helps solve a refinery combustion problem. Finding ways to limit NOx from fired heaters, especially under stringent environmental regulations, has become a major concern for the petroleum refining industry. Complying with new stricter regulations, a Texas refinery upgraded the burners in one of its large cylindrical furnaces.

    Roberto Ruiz, Ph.D., John Zink Co.
  • Publishing suffers a deep loss

    Longest-serving editor embodied the best of the profession. Mark Rosenzweig pays tribute to the late Nick Chopey.

    Mark Rosenzweig, Editor in Chief
  • Choose the right fluid for your pressure test

    Compressed gas often makes the most sense for checking a process, according to Senior Editor Dirk Willard, in this month's Field Notes column.

    Dirk Willard, senior editor
1661-1680 of 2071 < first | | | last >