Articles

741-760 of 875 < first | | | last >
  • Debunk plant myths about diagnostics

    Your current control system can probably do more than you think. Everybody can agree that diagnostics are a good thing — they can identify problems early, and keep the plant running at peak performance. Learn how your existing control systems and analog instruments can deliver diagnostic capabilities, at a fraction of the cost of system or instrument replacements.

    George Buckbee, ExperTune, Inc.
    02/08/2007
  • Making the most of diagnostics

    Make the most of your diagnostics with this helpul summary from George Buckbee of ExperTune, Inc.

    George Buckbee, ExperTune, Inc.
    02/08/2007
  • pH sensor stands up to tough conditions

    Design provides improved reliability in a polymer-precursor batch reactor. Sensors must respond quickly and survive a harsh environment. Poor probe reliability can make the difference between a process that makes money and one that doesn’t.

    Kyle Becker, Polychemie
    01/08/2007
  • Make jacketing your strong suit

    Small details in jacketed-pipe configuration can have a big impact, according to Chemical Processing's Contributing Editor Andrew Sloley.

    Andrew Sloley, contributing editor
    12/05/2006
  • NeSSI’s success should be a lock

    The New Sampling/Sensor Initiative or NeSSI that replaces tubing, fittings and other hardware in a sampling system with miniature modular components makes sense. Enhancements now in the works should assure its success.

    Mark Rosenzweig, editor in chief
    11/29/2006
  • Data validation: Jewel in the fieldbus crown?

    Many users and most suppliers to the industry see process availability as the big payout benefit of Foundation Fieldbus (FF) diagnostics — a good portion of it realized through data validation.

    John Rezabek, Contributing Editor
    11/09/2006
  • Avoid trouble with slurries

    Handling slurries (a mix of solids and liquids), should be based on experience and experiments, not theory. Much of the knowledge obtained from pneumatic conveyors and fluidization systems can be used in understanding slurries.

    Thomas R. Blackwood, Healthsite Associates
    11/01/2006
  • Keep measurements on the level

    This article looks at six technologies — mechanical floats and displacers, differential pressure, capacitance, ultrasonic, radar, and guided wave radar — that are used most often for automated control, and provides practical guidance for choosing among them.

    Jerry Boisvert, Siemens Energy & Automation
    11/01/2006
  • Check for human errors

    You may be making an error if you don’t find time to double-check your own and other’s work. Making time to check human work can prevent costly mistakes and save time.

    Trevor A. Kletz, Loughborough University
    10/31/2006
  • Get answers to your biomonitoring questions

    Guidance for chemical manufacturers, processors, and distributors about Section 8(e) of the Toxic Substances control act was issued on September 14, by the U.S. Environmental Protection Agency (EPA). Chemical Processing's Regulatory Editor Lynn Bergeson discusses the new regulation.

    Lynn Bergeson, regulatory editor
    10/24/2006
  • Industry tackles a grave issue

    End-of-life and other product stewardship initiatives will impact chemical plants. An agreement to lessen the environmental impact of chemicals production will have global ramifications. Meanwhile, European end-of-life directives on electrical and electronic equipment already are having a worldwide effect.

    Mike Spear, editor at large
    10/24/2006
  • Raising the bar for control system security

    Security researchers at Wurldtech Analytics are partnering with ISA to establish procedures and an operations model for the security testing and certification of products used for control.

    Eric and Joann Byres, principals, Wurldtech Analytics
    10/12/2006
  • Washington targets plant security

    Federal actions undoubtedly will markedly impact the chemical industry. Nevertheless, we don’t know at this point whether federal chemical security legislation will happen in 2006.

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    09/22/2006
  • Expect tighter particulate matter standards

    Tighter particulate matter standards are in our future, according to Regulatory Editor Lynn Bergeson in this month's Compliance Advisor column on ChemicalProcessing.com

    Lynn Bergeson, regulatory editor
    09/21/2006
  • Intellectual property issues limit university research

    Colleges must slake their thirst for royalties as intellectual property issues limit industry-backed university research, according to Chemical Processing's Editor at Large Mike Spear.

    Mike Spear, editor at large
    09/21/2006
  • Security poses an inherent industry dilemma

    Industry faces the threat of draconian demands from Congress as chemical plants remain an attractive targets for terrorism attacks, according to Mark Rosenzweig, editor in chief of Chemical Processing.

    Mark Rosenzweig, editor in chief
    09/21/2006
  • Column configuration can cripple performance

    The importance of having the inherent capability to meet operating requirements and enable proper instrumentation performance is stressed by Contributing Editor Andrew Sloley.

    Andrew Sloley, contributing editor
    09/21/2006
  • NeSSI tames the communications monster

    The new sampling/sensor initiative (NeSSI) is moving steadily to fulfill its original promise of increased efficiencies, costs-savings, and micro-analytic capabilities despite recent growing pains related to fieldbus.

    Jim Montague, Executive Editor
    09/15/2006
741-760 of 875 < first | | | last >