Articles

181-200 of 237 < first | | | last >
  • Executing Alarm Management

    For you to succeed in advancing your strategy, while keeping the peace, you must meet many challenges — motivating personnel and juggling the integration of changes. The solution is better plant-wide communication and understanding of the alarm philosophy.

    Roy Tanner, and Rob Turner ABB and Jeff Gould, Matrikon
    08/07/2006
  • Avoid Alarm Blunders

    Ineffective alarm systems pose a serious risk to safety, the environment, and plant profitability. Too often, alarm system effectiveness is unknowingly undermined by poorly-configured alarms. Read about these 12 common mistakes that can undermine the management of your alarm system.

    Michael Marvan
    07/12/2006
  • Effective Shift Handover Is No Accident

    A successful handover between shifts heavily depends on the organizational skills of management and the effective use of the communication tools available. Learn what these tools are and get the most out of your operators.

    Ian Nimmo, User Centered Design Services, LLC
    06/28/2006
  • Meet SIS “User Approval” Mandates

    No manufacturer’s claim, third-party analysis or certification report reduces the user’s responsibility for determining that a product is fit for its purpose. Make sure to properly balance analysis and testing information with field experience.

    Angela E. Summers and Susan Wiley, SIS-TECH Solutions, LP
    05/11/2006
  • Field Notes: Don't Know Much Geometry

    The cornerstones of chemical engineering are often overlooked. Teaching theory to operators is crucial to safe operations.

    Dirk Willard
    04/12/2006
  • ASM Outperforms Traditional Interface

    Forty percent of operators at a world-scale North American ethylene plant site discovered that problems were solved 40% faster using new operator interface.

    Jamie Errington, Human Centered Solutions, Dal Vernon Reising, Human Centered Solutions, and Kevin Harris, Honeywell
    03/14/2006
  • Wireless wins wider role

    Wireless is poised for a big breakthrough in plant operations because of its ease of use, safety and potential for energy savings.

    C. Kenna Amos, contributing editor
    03/14/2006
  • Today’s China Syndrome

    The country boasts not just booming exports but a strong desire for the best technology.

    Mike Spear, editor at large
    09/27/2005
  • Software Drives OEM Toward Efficiency and Energy Savings

    ABB designed software for its ACS800 drive so Curtis-Toledo could improve the operation of its rotary-screw compressors. The customized software can control the system pressure, air delivery, oil temperature and duty cycle directly from the drive.

    John Wilmes, ABB Inc.
    06/23/2005
  • Process Engineering: HART Offers Value in Plant Control Systems

    There's a myth in plants that HART offers little for Plant Control Systems and Enterprise Level Networks. But Ed Ladd from the HART Communication Foundation writes that by accessing the data in HART devices on a "full-time" routine basis increases performance, integrity, and reliability of plant control and enterprise level systems.

    Ed T. Ladd, Jr., HART Communication Foundation, Austin, Texas
    05/11/2005
  • Process engineering: Dryer provides a concrete lesson in control

    Removing water or moisture from a liquid stream is a critical operation in many processes. Liquid stream dryers commonly contain either molecular sieves or adsorbents; during the last 20 years, the use of molecular sieves has become much more common.

    Andrew Sloley, contributing editor, and Richard Readshaw, senior staff process engineer for VECO USA Inc.
    05/03/2005
  • Process engineering: Doing your level best

    Plant engineers who find it is difficult to get good level measurements have plenty of company. A recent poll shows that it is considered to be one of the two most vexing problems by process automation professionals.

    04/08/2005
  • Process Manufacturing Workforce: Don't Be Thrown for a Loop

    When processing chemicals, it has become increasingly important to isolate the process from the work environment. The agitated filter dryer accomplishes this by providing a high degree of containment.

    Ian Nimmo and John Moscatelli, User Centered Design Services LLC
    04/08/2005
  • How Do You Train a Process Manufacturing Plant Operator?

    Sybron Chemicals had the right idea when it sought to properly document the procedures for its wastewater treatment plant. The first step for improving both employee and plant efficiency is to have an up-to-date plant manual.

    William Biach, Biach Information Arts
    03/11/2005
181-200 of 237 < first | | | last >