Articles

141-160 of 204 < first | | | last >
  • Pacify the Fear of a Changing Work Environment

    Understanding how changing a work environment affects people can reduce accidents. Management of Change (MOC) has been one of the hardest of the PSM requirements for industry to master. Making matters worse, it’s rarely applied to people and organization changes. But there are proven approaches.

    Ian Nimmo, User Centered Design Services, LLC
    02/19/2007
  • Rely on an Ombudsman for a Smoother Project

    Working with someone who speaks the operator’s language will avoid problems, according to Dirk Willard, in this month's Field Notes column.

    Dirk Willard, senior editor
    02/12/2007
  • Energy Savings Pick up Steam

    More attention to steam systems and trap monitoring provides big benefits. At most chemical plants, plant management and operators face increasing pressures to improve the energy efficiency of their processes, so they should see how they can save on steam.

    Mike Spear, editor at large
    01/30/2007
  • Making Your Process Operator-Proof

    Senior Editor Dirk Willard discusses Shigeo Shingo's take on mistake-proofing, or Poke Yoke, if you speak Japanese. The practice suggests the following devices: eliminate — redesign, facilitate — guide, mitigate — lessen the damage caused by the error, or flag — identify the error.

    Dirk Willard, senior editor
    12/05/2006
  • Keep measurements on the level

    This article looks at six technologies — mechanical floats and displacers, differential pressure, capacitance, ultrasonic, radar, and guided wave radar — that are used most often for automated control, and provides practical guidance for choosing among them.

    Jerry Boisvert, Siemens Energy & Automation
    11/01/2006
  • Process analysis gains greater online role

    Faster. Smaller. Smarter. Modular. All express the future of process analytics. And un-stoppable describes the ongoing migration of process analytical instruments to continuous, online, field-mounted use at chemical plants.

    C. Kenna Amos, contributing editor
    09/11/2006
  • Don’t Be the Hub of a Wheel

    Successful ‘green-field’ site start-ups depend on developing a team, says Senior Editor Dirk Willard.

    Dirk Willard, senior editor
    08/17/2006
  • Spot problems with adsorbents

    The longer-than-expected life of an adsorbent points up the need to always assess the consequences of system additions. While sometimes this may involve detailed calculations, simply looking to the laws of physics can eliminate potential headaches.

    Andrew Sloley, contributing editor and Bruce Veale
    08/14/2006
  • Executing Alarm Management

    For you to succeed in advancing your strategy, while keeping the peace, you must meet many challenges — motivating personnel and juggling the integration of changes. The solution is better plant-wide communication and understanding of the alarm philosophy.

    Roy Tanner, and Rob Turner ABB and Jeff Gould, Matrikon
    08/07/2006
  • Avoid Alarm Blunders

    Ineffective alarm systems pose a serious risk to safety, the environment, and plant profitability. Too often, alarm system effectiveness is unknowingly undermined by poorly-configured alarms. Read about these 12 common mistakes that can undermine the management of your alarm system.

    Michael Marvan
    07/12/2006
  • Effective Shift Handover Is No Accident

    A successful handover between shifts heavily depends on the organizational skills of management and the effective use of the communication tools available. Learn what these tools are and get the most out of your operators.

    Ian Nimmo, User Centered Design Services, LLC
    06/28/2006
  • Meet SIS “User Approval” Mandates

    No manufacturer’s claim, third-party analysis or certification report reduces the user’s responsibility for determining that a product is fit for its purpose. Make sure to properly balance analysis and testing information with field experience.

    Angela E. Summers and Susan Wiley, SIS-TECH Solutions, LP
    05/11/2006
  • Field Notes: Don't Know Much Geometry

    The cornerstones of chemical engineering are often overlooked. Teaching theory to operators is crucial to safe operations, says Dirk Williard in his monthly Field Notes column.

    Dirk Willard
    04/12/2006
  • ASM Outperforms Traditional Interface

    Forty percent of operators at a world-scale North American ethylene plant site discovered that problems were solved 40% faster using new operator interface.

    Jamie Errington, Human Centered Solutions, Dal Vernon Reising, Human Centered Solutions, and Kevin Harris, Honeywell
    03/14/2006
  • Wireless wins wider role

    Wireless is poised for a big breakthrough in plant operations because of its ease of use, safety and potential for energy savings.

    C. Kenna Amos, contributing editor
    03/14/2006
  • Today’s China Syndrome

    The country boasts not just booming exports but a strong desire for the best technology.

    Mike Spear, editor at large
    09/27/2005
  • Software Drives OEM Toward Efficiency and Energy Savings

    ABB designed software for its ACS800 drive so Curtis-Toledo could improve the operation of its rotary-screw compressors. The customized software can control the system pressure, air delivery, oil temperature and duty cycle directly from the drive.

    John Wilmes, ABB Inc.
    06/23/2005
141-160 of 204 < first | | | last >