Articles

321-340 of 432 < first | | | last >
  • Cut column energy consumption

    With increasing energy prices and public sensitivity to energy consumption, many plants are paying more attention to optimizing distillation. Simple and low-risk operational changes often can provide substantial savings.

    Andrew Sloley, VECO U.S.A.
    05/08/2007
  • Equipment & Services: May

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    05/08/2007
  • Energy management boosts competitiveness

    Energy Saver columnist Christopher Russell advises that you consider all the motives and rewards for managing plant-wide energy consumption.

    Christopher Russell
    03/28/2007
  • Sample pump eliminates emissions

    A compact system significantly improves analyzer accuracy. This innovative turnkey solution for analyzer emissions is a solid-state pump with an ultra-sensitive pressure regulator that mixes a compatible gas with the analyzer samples to achieve a constant vent header pressure — even during times of plant upset.

    Kazi Hassa, Parker Hannifin
    03/20/2007
  • Use a portfolio approach to energy management

    A business plan for industrial energy management is remarkably similar to financial planning, says Christopher Russell in his Energy Saver column.

    Christopher Russell, contributing editor
    03/01/2007
  • Equipment & Services: February

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    02/19/2007
  • Use a multifaceted approach to manage your energy costs

    One or two tools alone won’t allow you to maximize results, but this list of six common tools will help, according the Christopher Russell in this month's Energy Saver column.

    Christopher Russell, contributing editor
    02/12/2007
  • Energy Savings Pick up Steam

    More attention to steam systems and trap monitoring provides big benefits. At most chemical plants, plant management and operators face increasing pressures to improve the energy efficiency of their processes, so they should see how they can save on steam.

    Mike Spear, editor at large
    01/30/2007
  • Take the right first step to manage your energy costs

    Conducting an energy assessment provides a business plan for improvements and is the first step to managing energy costs, according to Chemical Processing's energy columnist Christopher Russell.

    Christopher Russell, energy columnist
    12/18/2006
  • Valve innovation helps with nuclear waste

    Valves and actuators designed for handling radioactive waste must meet strict government requirements. This sometimes requires unconventional solutions. Such was the case at the Hanford Waste Treatment Project (WTP), Hanford, Wash.

    Roy Johnson, Flowserve
    12/05/2006
  • Get answers to your biomonitoring questions

    Guidance for chemical manufacturers, processors, and distributors about Section 8(e) of the Toxic Substances control act was issued on September 14, by the U.S. Environmental Protection Agency (EPA). Chemical Processing's Regulatory Editor Lynn Bergeson discusses the new regulation.

    Lynn Bergeson, regulatory editor
    10/24/2006
  • Washington targets plant security

    Federal actions undoubtedly will markedly impact the chemical industry. Nevertheless, we don’t know at this point whether federal chemical security legislation will happen in 2006.

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    09/22/2006
  • Boiling water is easy as one, two, three, four

    There’s more to boiler level control than measuring level and adjusting a feedwater valve. Improved measurements and inverse response are just a few of the influences on operating boilers in a reliable manner.

    David W. Spitzer
    09/15/2006
  • CAGI to verify compressor claims

    The compressed air industry is taking a step that will clear the air about the performance of its equipment. For the first time, many compressed air equipment manufacturers will submit their 50 hp to 200 hp lubricated rotary-screw compressors and 200 cfm to 1,000 cfm refrigerated air dryers to an independent laboratory for performance testing.

    Ken Byrd
    09/11/2006
  • Implementation fatigue

    The new market realities of higher and rising energy costs as well as global pressures to reduce fossil fuel intensity have made energy management tracking much more valuable. Learn how to keep energy productivity programs from running out of gas in Peter Garforth's latest Energy Expert column.

    Peter Garforth
    09/11/2006
  • The rise and fall of modulation

    Why have reciprocating designs fallen out of favor relative to the rotary compressor that is so predominant today? Read about the evolution of efficient controls for compressed air systems.

    Henry Kemp
    09/11/2006
321-340 of 432 < first | | | last >