Articles

on 'Powder & Solids'

101-120 of 159 < first | | | last >
  • Material Handling: Ensure Proper Silo Design

    Designing equipment for solids is not an exact science. The flows of gases and liquids are generally better understood than those of solids. Most production problems arise from flaws in the design. This article presents questions you can ask yourself to ensure reliable flow in your silo.

    Joseph Marinelli, Solids Handling Technologies, Inc.
    09/22/2006
  • Innovations in batching, dosing and weighing

    Challenges brought on by new regulations and technical problems for batching, dosing and weighing have pushed users to find some innovative and surprising solutions beyond our own industry.

    09/05/2006
  • 2006 Readers' Choice Survey

    The equipment, services and suppliers selected to make a job easier greatly contribute to on-the-job success. The Readers' Choice survey identifies the leading vendors in more than 40 categories.

    Ken Schnepf, managing editor
    08/17/2006
  • Shake up your processing lines

    Vibratory equipment plays a critical role at many plants and there are significant opportunities to upgrade this equipment.

    Linda Mioduszewski, Eriez Magnetics
    07/31/2006
  • Get a handle on solids’ flow

    Properly accounting for how bulk solids actually will flow in a vessel or overall process can be crucial for successful operations. Learning some simple parameters can often provide a good sense of flowability.

    Don McGlinchey, Glasgow Caledonian University
    05/22/2006
  • Ribbon blender ups production of powders

    Read about a new mixing process increases annual capacity by almost 900%. The ribbon blender incorporates a bag dump station, a receiving hopper, and a pneumatic conveying system.

    Charlie Divine, Munson Machinery Company, Inc.
    05/01/2006
  • Mind Mixer Mechanical Design

    While most mixers can provide a long service life — for instance, some are still operating after more than 30 years — mechanical problems can shorten life or even break parts. In this article, learn about all the mechanical problems that may befall your mixing equipment.

    David S. Dickey, MixTech, Inc.
    04/18/2006
  • PIP Tenth Annual Conference

    PIP’s 10th Annual Conference “New Tools – New Realities” will be held on Tuesday, April 25, 2006 in Houston, Texas. The one-day conference will include presentations, a demonstration from key industry leaders, several workshops, and award activities to recognize contributions from PIP Member Companies’ participants.

    Process Industry Practices
    04/07/2006
  • Don't Let Phase Changes Faze You

    Phase changes in the downstream processing or handling of solids cause many process problems that have inexpensive solutions.

    Tom Blackwood, Healthsite Associates LLC
    10/04/2005
  • Simulated Moving Bed Chromatography Offers Real Attractions

    A continuous purification technique, simulated moving bed chromatography combines high yields and purities with easy scale up and reasonable throughputs.

    Kathleen Mihlbachler, Eli Lilly and Company, and Olivier Dapremont, Aerojet Fine Chemicals
    08/31/2005
  • Build up agglomerate quality

    Several easy-to-use indices related to material flow properties can help to predict and improve an agglomeration process and product quality.

    Kristin O’Quest and Lee Dudley, Diamondback Technology, Inc.
    08/31/2005
101-120 of 159 < first | | | last >