Articles

on 'Water/Wastewater'

201-220 of 291 < first | | | last >
  • Heat integration steps can present control problems

    The more energy prices rise, the more heat integration saves. However, heat integration steps can present complex control problems. Slip-ups in putting control systems in place can make operations nearly impossible. That certainly was the case at one unit using heat recovery.

    Andrew Sloley, contributing editor and Carolyn K. Hawley, VECO USA
    09/13/2006
  • Five steps to manage Title V compliance

    Process analytics migrate to online useIf you're responsible for managing Title V at your facility, or you are in the process of securing your Title V permit, you know that the Title V operating program requires that facilities demonstrate, in one document, their compliance. A company needs more than technology to succeed at compliance.

    Greg Gasperecz, Enviance
    09/11/2006
  • Succeed at bioprocess scale-up

    While fermentation-based syntheses were once reserved for producing high-value specialty chemicals and biopharmaceuticals, bioprocess routes now are gaining increasing attention for commodity products.

    John L. Shaw, P.E., and Scott A. Rogers, P.E., CH2MHill Lockwood Greene
    08/28/2006
  • Energy savings are often disguised as problems

    Carefully managing compressed air can save money. Compressed air is often overlooked in energy studies because many people do not fully understand compressed air equipment, their own system, or what it costs to produce compressed air power.

    Scott Van Ormer and Don Van Ormer, senior application engineers, Air Power USA
    08/18/2006
  • The impact of the European Union's directives on the U.S.

    The Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (the RoHS Directive) is part of a growing wave of European Union product-based regulations that will profoundly impact global and United States product standards — and thus the chemical industry.

    Lynn Bergeson, regulatory editor
    08/17/2006
  • Small sensors promise big impact

    Because many environmental applications of nanotechnology will almost certainly revolutionize the science, law, and regulation of water pollution, readers are urged to keep abreast of this fast-changing area.

    Lynn Bergeson, regulatory editor
    06/28/2006
  • Paired processes aim to fuel biodiesel buildup

    The first plant to go from biomass to syngas to biodiesel is slated for 2007 startup. Once started up early next year, the unit will feed in 75,000 mt/yr of wood chips and straw to make so-called SunDiesel.

    05/11/2006
  • Ribbon blender ups production of powders

    Read about a new mixing process increases annual capacity by almost 900%. The ribbon blender incorporates a bag dump station, a receiving hopper, and a pneumatic conveying system.

    Charlie Divine, Munson Machinery Company, Inc.
    05/01/2006
  • Wireless wins wider role

    Wireless is poised for a big breakthrough in plant operations because of its ease of use, safety and potential for energy savings.

    C. Kenna Amos, contributing editor
    03/14/2006
  • Separations in flux

    Separation processes often account for more than 50 percent of a chemical company's operating costs. Read how membranes and other non-thermal technologies poised to win a wider role.

    Mike Spear, editor at large
    02/15/2006
  • Safeguard plant safety

    The worst thing that can happen at your plant is that an employee suffers a serious injury from a preventable accident. Follow some proven maintenance pointers to keep operations safe.

    Joe Kaulfersch, Pepperl+Fuchs
    01/23/2006
  • Flow metering gets more fluid

    There are more and more funcationalities being added to your most trusted instrumentation. These established technologies have expand their reach and performance.

    Mike Spear, editor at large
    01/09/2006
  • Track that spill

    Chemical Processing's readers offer tips about how to locate and identify a chemical spill.

    01/02/2006
  • Don’t waste your boilers

    Chemical Processing's readers offer tips about how to properly isolate a waste heat boiler.

    01/02/2006
  • Know when the end is near

    Chemical Processing's readers offer tips about how to determine resin-reaction end point.

    01/02/2006
  • Optimize Water Use

    Four major drivers are spurring increasing interest in optimizing water use.

    Tabatha Pellerin and John Woodhull, ENSR International
    10/25/2005
201-220 of 291 < first | | | last >