Articles

on 'Water/Wastewater'

181-200 of 294 < first | | | last >
  • China teems with harmful exports

    Problems with Chinese manufacturing go well beyond defective and dangerous products, Mark Rosenzweig, editor in chief, notes in this month's installment of From the Editor.

    Mark Rosenzweig, Editor in Chief
    08/28/2007
  • Don’t look at precondensers in a vacuum

    Consider the impact of the downstream vacuum ejector on precondenser performance, advises Andrew Sloley, in this month's Plant InSites column.

    Andrew W. Sloley, contributing editor
    08/20/2007
  • Chill out about cooling costs

    Plastic towers can offer economic and operational advantages, and now come in modular designs suitable for bigger loads. Converting to a plastic cooling tower can yield substantial savings.

    Dave Jurgensen, Delta Cooling Tower
    08/20/2007
  • Better water technology is on tap

    The drought in many parts of the U.S. so far this summer points out the preciousness of water supplies. There’s greater demand for waste-minimization and recycle-and-reuse technologies as well as more awareness of utility usage and the impact of life-cycle costs on water-treatment operations. Here’s a look at new technologies that will help.

    C. Kenna Amos, contributing editor
    07/24/2007
  • Face energy challenges like a frontiersman

    Be both a hunter and a farmer of energy management, advises Contributing Editor Christopher Russell, in this month's Energy Saver column.

    Christopher Russell, contributing editor
    07/24/2007
  • Cut column energy consumption

    With increasing energy prices and public sensitivity to energy consumption, many plants are paying more attention to optimizing distillation. Simple and low-risk operational changes often can provide substantial savings.

    Andrew Sloley, VECO U.S.A.
    05/08/2007
  • Equipment & Services: May

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    05/08/2007
  • Optimize pump life cycle

    Understanding an operating system reduces costs and improves reliability. Getting the most out of your pump demands a well-thought-out, holistic strategy.

    Tom Carsten and Barry Erickson, Flowserve
    04/30/2007
  • Dow engineer wins the 3rd annual Plant Innovation Award

    This year’s award goes to Bridget Schoonover, senior improvement specialist for Dow in Freeport, Texas, who led a team that validated and implemented a solution to a source of lost revenue at the plant: a waste stream.

    Dirk Willard, senior editor
    04/25/2007
  • Sample pump eliminates emissions

    A compact system significantly improves analyzer accuracy. This innovative turnkey solution for analyzer emissions is a solid-state pump with an ultra-sensitive pressure regulator that mixes a compatible gas with the analyzer samples to achieve a constant vent header pressure — even during times of plant upset.

    Kazi Hassa, Parker Hannifin
    03/20/2007
  • Compelling reasons to choose an insertion magnetic flow sensor

    Measuring flow rates and volumes of water and chemicals in the water, wastewater and chemical treatment industries requires the latest, simple to use and cost-effective technology that can keep up with the rigorous demands of the various applications.

    03/14/2007
  • Find the perfect steam trap

    Consider a variety of factors to select a unit that comes the closest. What steam traps lack in size, they make up for in numbers. In a typical steam plant, their numbers range from several hundred in a large steam plant to more than 20,000 in refinery or chemical complexes.

    Stephen Frank, Richards Industries, Inc.
    01/11/2007
  • Chemical industry sees green

    Developments target economics, not just environmental benefits. While pollution prevention was the original goal of green chemistry, today’s efforts promise to have a substantial economic impact.

    Mike Spear, editor at large
    01/03/2007
  • Take the right first step to manage your energy costs

    Conducting an energy assessment provides a business plan for improvements and is the first step to managing energy costs, according to Chemical Processing's energy columnist Christopher Russell.

    Christopher Russell, energy columnist
    12/18/2006
181-200 of 294 < first | | | last >