Articles

on 'Automation & IT'

181-200 of 229 < first | | | last >
  • NeSSI tames the communications monster

    The new sampling/sensor initiative (NeSSI) is moving steadily to fulfill its original promise of increased efficiencies, costs-savings, and micro-analytic capabilities despite recent growing pains related to fieldbus.

    Jim Montague, Executive Editor
    09/15/2006
  • Heat integration steps can present control problems

    The more energy prices rise, the more heat integration saves. However, heat integration steps can present complex control problems. Slip-ups in putting control systems in place can make operations nearly impossible. That certainly was the case at one unit using heat recovery.

    Andrew Sloley, contributing editor and Carolyn K. Hawley, VECO USA
    09/13/2006
  • Fieldbus improves control system reliability

    Profibus-PA and Foundation Fieldbus both reduce cabling cost by sharing wiring among several field instruments. They also save money by reducing the number of instrument interface cards required to connect field instruments to the control system. However, they all save money by being able to use the same field transmitter for a wide range of measured variables.

    Dick Caro
    09/11/2006
  • Process analysis gains greater online role

    Faster. Smaller. Smarter. Modular. All express the future of process analytics. And un-stoppable describes the ongoing migration of process analytical instruments to continuous, online, field-mounted use at chemical plants.

    C. Kenna Amos, contributing editor
    09/11/2006
  • HMIs evolve in process control

    New HMI technology is putting a whole new (inter)face on how operators view control systems information, while at the same time driving human error out of systems and improving safe work practices.

    Ian Nimmo, president, User Centered Design Services LLC
    09/11/2006
  • 2006 Readers' Choice Survey

    The equipment, services and suppliers selected to make a job easier greatly contribute to on-the-job success. The Readers' Choice survey identifies the leading vendors in more than 40 categories.

    Ken Schnepf, managing editor
    08/17/2006
  • Avoid Alarm Blunders

    Ineffective alarm systems pose a serious risk to safety, the environment, and plant profitability. Too often, alarm system effectiveness is unknowingly undermined by poorly-configured alarms. Read about these 12 common mistakes that can undermine the management of your alarm system.

    Michael Marvan
    07/12/2006
  • Level transmitter — art not science

    There is much more to setting up a transmitter than a mere equation. Design and control errors can certainly compromise performance. Follow these simple tricks to get it right.

    Dirk Willard
    06/13/2006
  • Nanotechnology raises big concerns

    Nanotechnology is grabbing headlines these days and the growing prospects of its use is spurring increasing attention to safety issues. This article examines the worldwide reaction to burgeoning popularity of the technology and what safety concerns are legit.

    Mike Spear, editor at large
    05/25/2006
  • Meet SIS “User Approval” Mandates

    No manufacturer’s claim, third-party analysis or certification report reduces the user’s responsibility for determining that a product is fit for its purpose. Make sure to properly balance analysis and testing information with field experience.

    Angela E. Summers and Susan Wiley, SIS-TECH Solutions, LP
    05/11/2006
  • Paired processes aim to fuel biodiesel buildup

    The first plant to go from biomass to syngas to biodiesel is slated for 2007 startup. Once started up early next year, the unit will feed in 75,000 mt/yr of wood chips and straw to make so-called SunDiesel.

    05/11/2006
  • Why do you need performance supervision?

    One way to unlock control system secrets is to implement PSS, a smart performance reporting system that can dramatically help save time, money, and prevent problems with your processes.

    05/11/2006
  • Choose the right temperature sensor

    There’s no simple solution to achieving accurate temperature measurement. It’s a combination of knowing the inherent accuracy of particular sensor types, and how environmental factors can create further measurement uncertainty and the sensor calibration techniques available to reduce this uncertainty.

    Cal Swanson, Watlow Electric Manufacturing Co.
    04/24/2006
  • BP tackles Texas City failings

    British Petroleum's tragic March 2005 explosion has been well-documented through the press. Read here to find out how that tragedy spurred the development of a new program addressing management issues at BP.

    Foster Finley and Karl Roberts, AlixPartners
    04/12/2006
  • ASM Outperforms Traditional Interface

    Forty percent of operators at a world-scale North American ethylene plant site discovered that problems were solved 40% faster using new operator interface.

    Jamie Errington, Human Centered Solutions, Dal Vernon Reising, Human Centered Solutions, and Kevin Harris, Honeywell
    03/14/2006
  • Succeed at system migration

    Learn to avoid the common pitfalls that each migration option poses. Here are 10 basic migration techniques.

    Ken Keiser, Siemens Energy and Automation
    02/13/2006
  • Oil refinery minimizes manual tank measurements

    The strategy was to enhance plant profitability, increase throughput capacity, upgrade product yields and improve on-stream reliability. Read here to find out what they accomplished.

    Sean Leonard, Matrikon
    02/10/2006
181-200 of 229 < first | | | last >