If the flow rate is critical and regular wire cloths don't offer suitable open area, alternative engineered designs or configurations often will provide the solution. For instance, corrugated wire mesh can furnish larger effective open area in a restricted space. Economics then would become an increasingly important component to the decision-making process.
Accurate influent characteristics are critical for flow-rate/pressure-differential calculations and, thus, to proper design. For instance, as Figure 1 shows, viscosity can have a major impact. Too often, though, fluids are characterized as "similar to water" or "just like …." This lack of significant data often leads to improper mesh choice.
In every application that involves throughput of liquid or gas, the selected wire cloth's pressure differential is a critical consideration. Cloths that appear quite similar actually can differ significantly in the pressure differential they produce. Direct orifice calculations, charts and graphs are available to determine pressure differential.
Many of the finer cloths, such as the Dutch weaves, don't have an easily measurable opening. So, getting pressure differential values may require testing or tapping the manufacturer's experience and data.
The shape and style of filter — conical, fluted, corrugated, multitier or multistage — enable tailoring to achieve the desired result while passing the necessary flow.
KIND OF WEAVE
Like ordinary fabrics, wire cloth comes in a wide variety of weaves. It is made out of practically every gauge of wire and in innumerable combinations of wire diameter and mesh size (i.e., the number of openings per linear inch — for example, 10 × 10 mesh has 10 openings/linear in. or 100 holes/in.2).
Every type of weave has a use. Wire cloth most typically has a square configuration, with the same count vertically and horizontally. Rectangular or off-count mesh also is available, offering greater throughput but less structural strength for the same sizing ability.
Most separation services and coarse filtrations usually use a simple double-crimp weave. Cloth made of extra-fine wire (up to 400 × 400 mesh or 160,000 holes/in.2) is either double-crimp or twill. The Dutch and standard weaves don't produce square openings but rather wedge-shaped ones that aren't parallel to the surface of the cloth. These cloths serve in centrifugal and pre-coat filters, and comprise the majority of the ultra-fine wire cloths.
Wire cloth customarily is woven 100-ft long (the industry's "standard bolt") and 36- or 48-in. wide, although cloths as wide as 96 in. sometimes are made. Finer versions usually are a standard 36-in. width. Cloths of any desired width or length are attainable by welding sections together.
Cloth may be woven of any malleable metal or alloy. The choice depends upon corrosion, environmental and other issues posed by a particular application.
Cloths most commonly are made of steel, copper, brass and high-nickel alloys; aluminum, bronze, phosphor-bronze, nickel, nickel-chromium, galvanized- or tinned-steel, and stainless-steel cloths are readily available. Noble, rare and refractory metals, e.g., gold and gold-plated metal, platinum, silver, tungsten, molybdenum, columbium, tantalum and titanium, also are used.
Water applications most commonly rely on stainless steels because they have the greatest range of corrosion resistance at a practical cost. Certain concentrations of contaminants in liquids may require use of a more-exotic material. Table 1 indicates normal resistance of common wire-cloth materials to various contaminants.
In air-pollution-control baghouse applications, a wire cloth's strength and corrosion resistance frequently are crucial. For example, where free sulfides are a particular problem, titanium and other exotic alloys find use, either as a strengthening backing cloth or as the actual filter medium.
Always keep in mind that wire cloth by nature is susceptible to corrosion. Instead of attacking one surface, corrosive action will take place all around the wire. So, a corrosion rate that might be considered negligible for metal plate might be excessive for wire cloth. For this reason, it's usually wise to choose a material with the highest corrosion resistance consistent with the economics of the application.
In some applications, particularly in filtering or screening seawater or brackish water, the risk of galvanic or electrolytic corrosion due to other components in the system can impact the selection of wire cloth material. Metals close to each other in the electrolytic galvanic series are less severely affected; materials usually are chosen so that the more-active one forms the major component.
A major value of wire cloth comes from its combination of excellent physical strength with relatively light weight. Actual weight, of course, depends upon the specific metal, the diameter of the wire and the mesh of the cloth. Used as a structural member, wire cloth provides support without impeding flow and without excessive weight. Used as a screen, it resists abrasion, can be cleaned with high-velocity water or chemical cleaners, mechanically scraped or rapped, and even, in some cases, have ice pounded off with a hammer, with little chance of damage. Equally important for applications such as spark arresters, petrochemical pressure filtration, etc., is wire cloth's high-temperature strength (Table 2).
E. MARVIN GREENSTEIN is director of engineering of Newark Wire Cloth, Clifton, N.J. E-mail him at firstname.lastname@example.org.