Wireless proponents take HART

More chemical plants are expected to go wireless with the introduction of the new wireless protocol for HART devices.

By C. Kenna Amos, contributing editor

Share Print Related RSS
Page 2 of 2 1 | 2 Next » View on one page

Zielinski also expects WirelessHART to excel for bringing in now-stranded diag-nostic information. “Of the millions of installed devices, about 2 million digitally com-municate,” he estimates. “For the rest, WirelessHART provides an add-on to communi-cate digital information back to the asset management system.” Up until now, with the 4–20-mA loop and no wireless capability, the field technician had to go out with a handheld communicator, he notes.

The protocol also allows engineers to monitor more points to improve processes’ efficiency, Zielinski adds. “This is process improvement, in routine maintenance and the ability to track devices.”

However, some argue that the protocol may not be the way to attain the fullest as-set-management potential. Jeff Becker, global business director for Honeywell Process Solutions, Phoenix, is skeptical. “When you look at the plant-wide wireless needs beyond stranded device diagnostics and the limited wireless bandwidth available, there are better plant-wide alternatives, such as SP100, available,” he says.

Potential limitations exist. “Even though the 2.4-GHz bands are open [world-wide], there are different implementations in different areas due to signal strength,” Zielinski notes. And Johnston points out the trade-off between battery life and data-transmission rate. However, engineering tools and layout planning can help increase the battery life, as will expected improvements in battery technology, he stresses.

First adopters

Helson predicts that oil-and-gas and large chemical complexes will lead the way. “Com-panies such as British Petroleum seem to be clamoring for wireless devices. They spoke at one of our meetings and said they’re anxious to get this.”

ABB and P+E agree. “Oil-and-gas companies have been very keen to pilot wire-less technology and help make the early technology decisions,” Johnston reports. Annual shutdowns will drive petrochemicals [into] being first adopters, Schosker suggests. “With wireless, they can add HART without touching the existing wiring — they can do it on their time, and get their plant back in full swing and then work on HART.”

Zielinski, while noting that WirelessHART won’t be restricted to any industry, sees a pioneering role for companies with money to spend — which means to him those in oil and gas, and perhaps also pharmaceuticals.

A potential competitor

However, some firms may deliberately wait to see what comes out of ISA, Research Tri-angle Park, N.C. And they “will use ISA [SP]100, not WirelessHART,” expects Richard H. Caro, CEO, CMC Associates, Acton, Mass.

SP100 does have a very broad scope, says Zielenski, who is also SP100’s manag-ing director. “[But] release 1 [ISA SPA.100.11a] is very similar to the field of application of WirelessHART. Right now, we’re very, very compatible with WirelessHART.”

They’re both optimized for battery-powered field instruments, explains Becker. “They trade off the higher bandwidth of IEEE 802.11 [wireless local-area-network stan-dard] for lower power consumption, better scalability and better reliability and noise-rejection qualities.” And both have similar features designed to improve reliability and co-existence, he adds.

But they’re different. “WirelessHART is designed to be a single-purpose dedicated network to transport HART data — primarily diagnostic — wirelessly,” Becker notes. SP100.11a is designed, though, to be a universal standard that simultaneously supports multiple protocols. Besides HART, some he mentions include OPC, Foundation Fieldbus and Profibus.

Figure 2. Demonstration units have appeared at several trade shows.
Figure 2. Demonstration units have appeared at several trade shows.

The two wireless contenders have similar implementation costs, says Becker, and Honeywell believes “the efficiency of transporting HART data is similar” for the two. However, Becker sides again with SP100. “We believe it provides more value to custom-ers, even if only HART over SP100 wireless is implemented.”

Reaffirming SP100’s primary standing with Honeywell, he says the company “in-tends to migrate our XYR-6000 family of wireless transmitters to the SP100 stan-dard initially — because it is more universal.”

Johnston thinks harmony is possible because of the new HART protocol’s design and coexistence features. “WirelessHART and SP100 instrument networks will coexist in the same radio environment,” he declares, adding it’s “likely that a WirelessHART gate-way to the SP100 plant network will be developed in the future.”

How this all will shake out remains uncertain. Schosker undoubtedly speaks for many users and vendors when he says P+F “strongly hopes that just one standard will exist for process automation… We want to avoid a ‘wireless war’ similar to the ‘fieldbus war’.” That ended with a standard (IEC 61158) incorporating rather than reconciling the competing protocols.

Wait until next year

No WirelessHART products currently exist because “we need to rationalize comments,” says Helson. That will lead to a framework for companies to build products, he adds. “You’ll probably start to see WirelessHART-enabled products in early 2008.”

Helson anticipates that one early and important device will be an add-on, “a slap-on,” for existing wired HART devices to “establish a new wireless path to asset-management-type applications without disturbing the 4-20 mA signal.” Then there’ll be gateways, he expects.

“Pepperl+Fuchs has released working prototypes of a HART gateway (Figure 1),” Schosker notes, adding this doesn’t represent a shift in the company’s strategy. “WirelessHART gives us just another tool to help our customers and find a solution to their need.”

Emerson will broaden the role of PlantWeb, a real-time control-and-asset-management architecture, Zielinski says. ABB will continue to develop self- and outside-powered wireless devices — process transmitters — for instrumentation and others for condition monitoring, Johnston notes. Suggesting silicon’s availability will affect product releases, he reckons “product to be available early 2008.”

Invensys “has supported HART for quite a while and will continue to support HART as wireless communications,” comments Brian Courchesne, marketing manager with Invensys Performance Services, Foxboro, Mass. Yokogawa is looking at Wireles-sHART sensors, environmental sensors that differ from existing process monitoring sen-sors and gateways, Smith says.

Siemens has exhibited WirelessHART demonstration field devices at the 2006 ISA Expo and 2007 Interkama shows (Figure 2). “It seems so far that customers are in-terested in getting some more experience with the new technology, step by step,” Stephan notes.

“Honeywell will offer WirelessHART, if customers request it, of which we have seen little indication of this to date,” Becker says.

Besides new products, education is important to the protocol’s success. Zielinski points to the inevitable learning curve and the need to share insights. “The information the buy-it-and-try-it people [will] have learned and their confidence in WirelessHART has to become common knowledge across the board.” Helson agrees. “We’re going to need to educate users, to overcome their fears and concerns about wireless-enabled field devices.” Even end-users who think they’re familiar with HART should “take another look,” advises Shear.

Untethered prospects

Weiss counsels the curious to try WirelessHART. “If it sounds too good to be true, it is true here.” She also encourages those who used wireless years ago and said it didn’t work very well to try wireless again. “It’ll be a new experience. Try it, you’ll like it.”

Becker says the “big promise of wireless is to simply make the plant more safe, efficient and reliable. It is an enabling technology that opens many new doors.” Helson, with WirelessHART specifically in mind, certainly agrees. “It will open a lot of new doors, to help [companies] run their plant better, to keep their plant competitive.”

Page 2 of 2 1 | 2 Next » View on one page
Share Print Reprints Permissions

What are your comments?

You cannot post comments until you have logged in. Login Here.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments